In Need Of Help (Corsa 2.5 V6)

D_a-RR-e_N · Post by **D_a-RR-e_N** » Mon Oct 17, 2005 12:47 am

hello again, started striping car down tonight and fired it up left it ticking over for about 15Min\'s and had it held about 2000rpm and it revved up and down on its own ? any ideas and engine management light is still on ?? any clues

trev150 · Post by **trev150** » Mon Oct 17, 2005 1:54 pm

do the paper clip test.

www.topbuzz.co.uk

D_a-RR-e_N · Post by **D_a-RR-e_N** » Mon Oct 17, 2005 8:04 pm

where is the plug on the v6 motor theres loads of plugs ! lol

trev150 · Post by **trev150** » Tue Oct 18, 2005 9:35 pm

Drivers footwell on my Calibra V6.

Just trace where the wiring goes through the bulk head.

D_a-RR-e_N · Post by **D_a-RR-e_N** » Wed Oct 19, 2005 10:53 pm

hello again after reading that site i had a go at doin paperclip test and then got codes still took it to a diagnostics place and they came up with same codes which where 93 Hall Effect Switch (HES) Low voltage and 22 Throttle position sensor Low voltage changedThrottle position sensor and seems to be reving better but still caughs and farts and pop through ait flow meter? ive been told that is hall switch is in the coil and you have to replace the full coil is this right and are they expensive?

thanks alot

trev150 · Post by **trev150** » Thu Oct 20, 2005 7:41 pm

I\'m not sure if you can access the HES. You will probably get more precise info from

www.clubcalibra.net

There are some right V6 guru\'s on there.

You can always try a part from a breakers yard and see if that works.

D_a-RR-e_N · Post by **D_a-RR-e_N** » Fri Oct 21, 2005 1:09 am

trev you have been a gem m8 thanks for all the help.

trev150 · Post by **trev150** » Sun Oct 23, 2005 6:10 am

It\'s ok mate.

Let us know what the final out-come is.

D_a-RR-e_N · Post by **D_a-RR-e_N** » Sun Oct 23, 2005 11:43 am

getting no help of clubcalibra

trying to find out if hall sensor is camshaft sensor on the v6 motors, ive replaced the coil back and its just the same!

gutted

trev150 · Post by **trev150** » Sun Oct 23, 2005 7:51 pm

Well the ultimate Vaux tech forums are:

www.cavweb-forums.co.uk

www.migweb.co.uk

If no-one can answer a query on here i will be surprised. I\'ll drop you a post at clubcalibra to try and help.

Trev

D_a-RR-e_N · Post by **D_a-RR-e_N** » Sun Oct 23, 2005 11:35 pm

got a few replys now m8 just gunna have ago at new camshaft sensor tomora
thanks again