Fitting Electric Windows

trev150 · Post by **trev150** » Wed Oct 05, 2005 10:47 am

Does anybody know if the electric window loom was fitted on all models?

corsa_sri · Post by **corsa_sri** » Thu Oct 06, 2005 11:23 pm

My corsa sri did not have all 20 or so connectors but the windows work fine. I think you only need a fully connected loom if you want heated and electric mirrors.

All works no probs

Good luck

trev150 · Post by **trev150** » Fri Oct 07, 2005 2:52 pm

I\'ll whip the door card off then and have a look.

Cheers

voodoo_jellybaby2k2 · Tue Oct 25, 2005 11:19 am

My Corsa Flair only has 9 pins, does that mean that i can have electric windows in without having to wire through an entire loom or not?

corsa_sri · Post by **corsa_sri** » Thu Oct 27, 2005 3:57 pm

think you need at least 12 or so. you have got central locking, and your speakers coming off at the mo so i dont know. Either way you will need the door loom.

voodoo_jellybaby2k2 · Fri Oct 28, 2005 12:48 am

lol, i dont have central locking on my car though.... :lol, or the motors in the doors for it either..... im guessing that they have just put the loom there incase anyone wants to put it in as an extra. Why couldnt the bastards of put the leccy window one there!!!

Cheers for the help fella, much appreciated!!

BAD ASS CORSA · Post by **BAD ASS CORSA** » Fri Oct 28, 2005 7:53 pm

Pretty sure in thinking all cars came with the loom although u might have to change the loom in the door. Mine is a pre 97 ls and i never had the loom for leccy windows. i had to acquire one for each door. If u look closely u can see the connector when u open the door. They are easy enough to change.

voodoo_jellybaby2k2 · Sat Oct 29, 2005 12:23 am

No they dont, otherwise i wouldnt have made the thread asking what nine pins in my door does. I already know that the flair, merit and swing corsa\'s that were pre-97 dont have the looms, and im wanting to know whether the loom will be inside the door, but not connected to the multiplug that leaves the car.....

punkheadgray · Post by **punkheadgray** » Sat Oct 29, 2005 12:30 am

sounds like those with 9pins wont have loom for leccy windows, mine was an SRI i have central locking but no leccy windows and the connectors are 12way,
trying to source some if somebody is breaking???

voodoo_jellybaby2k2 · Sat Oct 29, 2005 12:43 am

I have the full door loom with leccy windows/mirrors/central locking, everything including all of the buttons! Along with the motors for the electric windows only. As well as this i have some of the trim for the buttons to go into too.

If thats what your after, make me an offer, as its useless to me now as i dont have the dash loom for it to connect to in my car.