MOT
-
chrisdaman
- CB-Uk User
- Posts: 282
- Joined: Sun Jul 24, 2005 7:28 pm
- Location: Camberley
MOT
Just wondering what a car can fail an MOT on, mine\'s comin up and i was wonderin what stuff should work
dubster now
-
MonkeeBoy
- CB-Uk User
- Posts: 219
- Joined: Sat Jul 23, 2005 1:02 am
- Location: Wotton-Under-Edge
MOT
Exhuast emission (Bassicaly if you have a de-cat put a cat back on!:P )
if you have a sunstrip make sure the wipers aren\'t touching it
erm... tis may not apply to you, but handbrake cable has to be tightened if its not tight otherwise they fail you for something small as that,
tyre tread as to be above 1.6mm
your jet wash has to have water (Yes tis that pathetic)
and another stuff they will look for you,.... my fuel filter was loose and that failed it too... so if possible have a look and try to secure it if it is loose that is
hope this helps
if you have a sunstrip make sure the wipers aren\'t touching it
erm... tis may not apply to you, but handbrake cable has to be tightened if its not tight otherwise they fail you for something small as that,
tyre tread as to be above 1.6mm
your jet wash has to have water (Yes tis that pathetic)
and another stuff they will look for you,.... my fuel filter was loose and that failed it too... so if possible have a look and try to secure it if it is loose that is
hope this helps
Lists of mods:Type VR enclosed induction kit, Corner splitters (front), 15"Alloys Wider than standard wheelies, front and rear strut brace, JBL front speakers, JBL 6x9's, 4-2-1exhaust manifold, Catbacksystem+backbox, Pipercross crankcase breather, alarm system(unkown i forgot!! :(), Bilsein sports kit 40mm allround...
-
MonkeeBoy
- CB-Uk User
- Posts: 219
- Joined: Sat Jul 23, 2005 1:02 am
- Location: Wotton-Under-Edge
MOT
Exhuast emission (Bassicaly if you have a de-cat put a cat back on!:P )
if you have a sunstrip make sure the wipers aren\'t touching it
erm... tis may not apply to you, but handbrake cable has to be tightened if its not tight otherwise they fail you for something small as that,
tyre tread as to be above 1.6mm
your jet wash has to have water (Yes tis that pathetic)
and another stuff they will look for you,.... my fuel filter was loose and that failed it too... so if possible have a look and try to secure it if it is loose that is
hope this helps
if you have a sunstrip make sure the wipers aren\'t touching it
erm... tis may not apply to you, but handbrake cable has to be tightened if its not tight otherwise they fail you for something small as that,
tyre tread as to be above 1.6mm
your jet wash has to have water (Yes tis that pathetic)
and another stuff they will look for you,.... my fuel filter was loose and that failed it too... so if possible have a look and try to secure it if it is loose that is
hope this helps
Lists of mods:Type VR enclosed induction kit, Corner splitters (front), 15"Alloys Wider than standard wheelies, front and rear strut brace, JBL front speakers, JBL 6x9's, 4-2-1exhaust manifold, Catbacksystem+backbox, Pipercross crankcase breather, alarm system(unkown i forgot!! :(), Bilsein sports kit 40mm allround...