want to replace my 12.8v to a bigger 8.v what are my limits.
-
- CB-Uk User
- Posts: 840
- Joined: Tue Apr 25, 2006 9:57 pm
- Location: manchester
want to replace my 12.8v to a bigger 8.v what are my limits.
right fellers got a few questions for you all in my new corsa project there is a 1.2 8v in it and i want to upgrade it to something bigger that is also an 8v \'\'so you cant tell the difference if you get what i mean\'\' right well according to the corsa book a 1.2 8v will do 0-60 in around 19secs and a 1.4 8v \'single point injection\' will do it in 13sec which is quite a difference but i was wondering weather you can get a 1.6 single point injection which would be even better as i doint really want to change my full wiring loom. when i get engine i will be taking head off having it skimed and i will port poilsh it etc before i put it in and also if i replace it with another 8v engine out of a nova corsa astra etc will they all be stright forwards fits. or if they dont do a 1.6 single point injection would i be able to convert it to one by changing the manifolds\'
my car also has power steering so the p/s pump could also be a problem.
thanks fellers sam
my car also has power steering so the p/s pump could also be a problem.
thanks fellers sam
-
- CB-Uk User
- Posts: 282
- Joined: Sun Jul 24, 2005 7:28 pm
- Location: Camberley
Re: want to replace my 12.8v to a bigger 8.v what are my lim
i was gna ask sumthing like this, would an SRI engine fit straight into my ar without any loom changes?
dubster now
-
- CB-Uk User
- Posts: 840
- Joined: Tue Apr 25, 2006 9:57 pm
- Location: manchester
Re: want to replace my 12.8v to a bigger 8.v what are my lim
if you have a muti point injection but if you have single point you will have to change your loom!!
-
- CB-Uk User
- Posts: 1105
- Joined: Mon May 15, 2006 7:57 pm
- Location: Huddersfield uk
Re: want to replace my 12.8v to a bigger 8.v what are my lim
If you upgrade to twin carbs i dont thing you have to the loom i think?
Fastest 8 valve in the west! http://www...co.uk
-
- CB-Uk User
- Posts: 840
- Joined: Tue Apr 25, 2006 9:57 pm
- Location: manchester
Re: want to replace my 12.8v to a bigger 8.v what are my lim
i think im gona get a 1.4 single point and skim the head and polish the ports and paint it up just make it look smart.
thanks fopr you help marky btw hoe is your super tunes 1.2 8v comein on you got the super charger on??
thanks fopr you help marky btw hoe is your super tunes 1.2 8v comein on you got the super charger on??
-
- CB-Uk User
- Posts: 343
- Joined: Thu Mar 17, 2005 10:58 pm
- Location: whitley bay
- Contact:
Re: want to replace my 12.8v to a bigger 8.v what are my lim
why not just geta 2.0 8v from a vaux cav ???
-
- CB-Uk User
- Posts: 1105
- Joined: Mon May 15, 2006 7:57 pm
- Location: Huddersfield uk
Re: want to replace my 12.8v to a bigger 8.v what are my lim
Coming along nicley only got to put the charger on then it\'s all done!
Fastest 8 valve in the west! http://www...co.uk
-
- CB-Uk User
- Posts: 840
- Joined: Tue Apr 25, 2006 9:57 pm
- Location: manchester
Re: want to replace my 12.8v to a bigger 8.v what are my lim
i would put a 2ltr 8v out of a cav in it but the engine looks different and then could get cought out lol were as from the 1.2-1.6 they all look the same rli.
glad to hear you engine is all done marky is it alredy in the car?
glad to hear you engine is all done marky is it alredy in the car?
-
- CB-Uk User
- Posts: 1105
- Joined: Mon May 15, 2006 7:57 pm
- Location: Huddersfield uk
Re: want to replace my 12.8v to a bigger 8.v what are my lim
No not yet am fabricating the shell befor i put the engine back in.back to what you where saying! but dont forget the engine codes are differant unless you grind them off BUT if the police pull you and they see the codes have been grindered off they will inpound it as the will think it\'s a ringer!! but the code on my engine say c12nz and that says it\'s a 1.2 but it is 1.4 supercharged engine see what am getting at?
Fastest 8 valve in the west! http://www...co.uk
-
- CB-Uk User
- Posts: 282
- Joined: Sun Jul 24, 2005 7:28 pm
- Location: Camberley
Re: want to replace my 12.8v to a bigger 8.v what are my lim
what are carburettors? i dont understand what they do, they replace the fuel injection dont they? they increase power dont they?
dubster now
-
- CB-Uk User
- Posts: 1105
- Joined: Mon May 15, 2006 7:57 pm
- Location: Huddersfield uk
Re: want to replace my 12.8v to a bigger 8.v what are my lim
Yea you are wright! It\'s just a differante way of mixing the fuel with the air. they are a good bit of kit av got a set on my engine can get up to 25bhp so realy good for performance[br]I got mine off ebay for £160 including p&p not a bad price!!
Fastest 8 valve in the west! http://www...co.uk
-
- CB-Uk User
- Posts: 282
- Joined: Sun Jul 24, 2005 7:28 pm
- Location: Camberley
Re: want to replace my 12.8v to a bigger 8.v what are my lim
awesome, cos i want alot of performance without getting raped on my insurance, so engine conversion out of the way, i get paid next week from my 2nd job so that will go towards the carbs, what do i need to look for? and brands, or model types etc
dubster now
-
- CB-Uk User
- Posts: 1105
- Joined: Mon May 15, 2006 7:57 pm
- Location: Huddersfield uk
Re: want to replace my 12.8v to a bigger 8.v what are my lim
you need Solex carbs or webbers dont forget you will also need to change the inlet manifold it will be pricey!
Fastest 8 valve in the west! http://www...co.uk
-
- CB-Uk User
- Posts: 58
- Joined: Sat May 14, 2005 2:04 pm
- Location: tamworth,staffordshire
- Contact:
Re: want to replace my 12.8v to a bigger 8.v what are my lim
sam13 wrote: i would put a 2ltr 8v out of a cav in it but the engine looks different and then could get cought out lol were as from the 1.2-1.6 they all look the same rli.
glad to hear you engine is all done marky is it alredy in the car?
not exactly mate,the 1.6 8v looks the same as a 2.0 8v
nly the 1,2 an 1.4 look the same
on the 1.6 upwards they have that little box on the head with the pipe coming out
NEXT MOD....tinted windows
-
- CB-Uk User
- Posts: 840
- Joined: Tue Apr 25, 2006 9:57 pm
- Location: manchester
Re: want to replace my 12.8v to a bigger 8.v what are my lim
arrrrrr get ya you recon a 1.8 single point injection would fit stright in with messing around and cgaing loom as no1 seems to know??
cheers sam
cheers sam