projekt corsa has begun :D
-
- CB-Uk User
- Posts: 113
- Joined: Sun Aug 06, 2006 2:50 pm
- Location: manchester
projekt corsa has begun :D
so then the plans
standard bumpers with a laguna splitter smoothed in and the lines on the bumper etc smoothed and the back same again just smooth as possable, badboy bonnet and should be geting some corsa c sxi alloys for it next week or week after then thats it i think nice n subtle
interia
wanted a corsa c dash but tbh cant be arsed with the amount of moding etc is neded to fit
so staying with the std dash probly just colour coded or maybe flocked
and as for the rest (atm has this horrible grey ls interia) im after a sport or gsi one or am gonna see about getting them re trimmed in a suade like meterial
few pics of how she looks atm will post any progress in here (bits have cvhnaged since the pics it has been stripped down now ready for the rust to be treated (on the rear 1/4 in the door shut!? comon thing i was told? and on the bonnet and then when thats all sorted haveing my boot lcok smoothed and wiper hole smothed out then after all that its just prep and paint then start on the interior
[img width=600 height=450]http://i89.photobucket.com/albums/k211/ ... 010482.jpg[/img]
[img width=600 height=450]http://i89.photobucket.com/albums/k211/ ... 010481.jpg[/img]
[img width=600 height=450]http://i89.photobucket.com/albums/k211/ ... 010486.jpg[/img]
[img width=600 height=450]http://i89.photobucket.com/albums/k211/ ... 010480.jpg[/img]
also my mfd display thing aint working are they on afuse or is it common for them to brake?
standard bumpers with a laguna splitter smoothed in and the lines on the bumper etc smoothed and the back same again just smooth as possable, badboy bonnet and should be geting some corsa c sxi alloys for it next week or week after then thats it i think nice n subtle
interia
wanted a corsa c dash but tbh cant be arsed with the amount of moding etc is neded to fit
so staying with the std dash probly just colour coded or maybe flocked
and as for the rest (atm has this horrible grey ls interia) im after a sport or gsi one or am gonna see about getting them re trimmed in a suade like meterial
few pics of how she looks atm will post any progress in here (bits have cvhnaged since the pics it has been stripped down now ready for the rust to be treated (on the rear 1/4 in the door shut!? comon thing i was told? and on the bonnet and then when thats all sorted haveing my boot lcok smoothed and wiper hole smothed out then after all that its just prep and paint then start on the interior
[img width=600 height=450]http://i89.photobucket.com/albums/k211/ ... 010482.jpg[/img]
[img width=600 height=450]http://i89.photobucket.com/albums/k211/ ... 010481.jpg[/img]
[img width=600 height=450]http://i89.photobucket.com/albums/k211/ ... 010486.jpg[/img]
[img width=600 height=450]http://i89.photobucket.com/albums/k211/ ... 010480.jpg[/img]
also my mfd display thing aint working are they on afuse or is it common for them to brake?
1994 burgandy LS,...... £uro wip :D
-
- CB-Uk User
- Posts: 1105
- Joined: Mon May 15, 2006 7:57 pm
- Location: Huddersfield uk
Re: projekt corsa has begun :D
Bear inmind rust has to be cut out!! So dont use any of that treatment as it wont work......
Fastest 8 valve in the west! http://www...co.uk
-
- CB-Uk User
- Posts: 113
- Joined: Sun Aug 06, 2006 2:50 pm
- Location: manchester
Re: projekt corsa has begun :D
markymicro wrote: Bear inmind rust has to be cut out!! So dont use any of that treatment as it wont work......
working ina boidyshop i already know that mate this is only surface rust and got my boss with 30 years experiance to chack it out he said just d/a it all out fill it and it will be fine .......
1994 burgandy LS,...... £uro wip :D
-
- CB-Uk User
- Posts: 1105
- Joined: Mon May 15, 2006 7:57 pm
- Location: Huddersfield uk
Re: projekt corsa has begun :D
Ok no probs, If it was my car i would cut it out seen too many people do what you are planning to and it come back through....
Fastest 8 valve in the west! http://www...co.uk
-
- CB-Uk User
- Posts: 237
- Joined: Tue Jun 13, 2006 10:40 pm
- Location: Leigh
-
- CB-Uk User
- Posts: 1105
- Joined: Mon May 15, 2006 7:57 pm
- Location: Huddersfield uk
Re: projekt corsa has begun :D
Rust is incurable, Anyone with the right mind would cut it out Like you said Simon! sounds like cowboys had hold of your astra befor you got it! but on the other hand rob16 does work in a bodyshop with a boss of 30 years experiance so who am i to judge???
Fastest 8 valve in the west! http://www...co.uk
-
- CB-Uk User
- Posts: 113
- Joined: Sun Aug 06, 2006 2:50 pm
- Location: manchester
Re: projekt corsa has begun :D
well rubbed it down today geting a new bonnet as this one is hamerd it has been treated before as when we rubbed it down there was filler under there so got another one lined up! and the bit on the rear 1/4 inside the door shut, rubbed that down and its right down to bear metel thats ok!
1994 burgandy LS,...... £uro wip :D
-
- CB-Uk User
- Posts: 1105
- Joined: Mon May 15, 2006 7:57 pm
- Location: Huddersfield uk
Re: projekt corsa has begun :D
What are you doing with your bonnet? I finished mine last week, bad boy....ed it with extention!
Fastest 8 valve in the west! http://www...co.uk
-
- CB-Uk User
- Posts: 113
- Joined: Sun Aug 06, 2006 2:50 pm
- Location: manchester
Re: projekt corsa has begun :D
exacly what you have done mate lol!
rust is all ground out etc now ready for filler 2moz
this is a pic of the rust on the 1/4 btw and seen a few on ebay with it in exacly the same place!
so guessing its a comon thing?!?!
[img width=600 height=450]http://img183.imageshack.us/img183/4523/p1010485ox2.jpg[/img]
rust is all ground out etc now ready for filler 2moz
this is a pic of the rust on the 1/4 btw and seen a few on ebay with it in exacly the same place!
so guessing its a comon thing?!?!
[img width=600 height=450]http://img183.imageshack.us/img183/4523/p1010485ox2.jpg[/img]
1994 burgandy LS,...... £uro wip :D
-
- CB-Uk User
- Posts: 113
- Joined: Sun Aug 06, 2006 2:50 pm
- Location: manchester
Re: projekt corsa has begun :D
btw thast dirt round it its not that ful area lol just along that line of the bodywork!
1994 burgandy LS,...... £uro wip :D
-
- CB-Uk User
- Posts: 840
- Joined: Tue Apr 25, 2006 9:57 pm
- Location: manchester
Re: projekt corsa has begun :D
you shoulda posted this in the projects bit. pleased too see more people are doing more projects than just sending them off to other ppl payin stupid amounts of money to have things done.
-
- CB-Uk User
- Posts: 840
- Joined: Tue Apr 25, 2006 9:57 pm
- Location: manchester
-
- CB-Uk User
- Posts: 113
- Joined: Sun Aug 06, 2006 2:50 pm
- Location: manchester
Re: projekt corsa has begun :D
well just got a boot popper only thing is no instructions with it just a blue and green wire so any help as to where i wire these 2 would be grate and the genral fitting of one , also as i am smoothing my bumpers i will also be getting rid of the numberplate light that sticks up so just got some white LEDs and thought if i tone them down a bit(IE so they are not as bright) would these be OK to use as plate lights?
don\'t suppose any of you guys know or have a wiring diagram do you? as need to know about a few things like putting central locking and my alarm etc in and also will come in handy as the head unit was nicked (last owner) and they never put another one in just taped the wires up so i have unwrapped them all and its just a bundle or cut and crimped wires lol i know a bit about auto electrics but would prefer to know exacly what needs to be done b4 i start messing about with wires and ending up with a burnt out shell that once was a corsa lol!
don\'t suppose any of you guys know or have a wiring diagram do you? as need to know about a few things like putting central locking and my alarm etc in and also will come in handy as the head unit was nicked (last owner) and they never put another one in just taped the wires up so i have unwrapped them all and its just a bundle or cut and crimped wires lol i know a bit about auto electrics but would prefer to know exacly what needs to be done b4 i start messing about with wires and ending up with a burnt out shell that once was a corsa lol!
1994 burgandy LS,...... £uro wip :D
-
- CB-Uk User
- Posts: 113
- Joined: Sun Aug 06, 2006 2:50 pm
- Location: manchester
Re: projekt corsa has begun :D
cheers simon
and the boot is now near enogh done just needs filler over the top 2moz sanding then thats ready for paint all comeing toger and looking less sorry for its self now lol!
and the boot is now near enogh done just needs filler over the top 2moz sanding then thats ready for paint all comeing toger and looking less sorry for its self now lol!
1994 burgandy LS,...... £uro wip :D
-
- CB-Uk User
- Posts: 840
- Joined: Tue Apr 25, 2006 9:57 pm
- Location: manchester
Re: projekt corsa has begun :D
you need to get some pics up rob.
simon you seem to have done alot to your corsa any pics?
simon you seem to have done alot to your corsa any pics?