hey i am on building up a corsa b so i thoguht i would put it up i have all sorts of bits palnned and have doing it for quite a while! i did have a v reg 1.4 corsa sport in red. but unforunatley before christamas i got cought on some ice and crashed and bent the chassis leg in. apart from that the car was still mint tho. i work in a garage and we luckily had a old lreg corsa in which was clean but the engine was knackered. so i decided to basically do a full reshell. but instead of just the standard parts iv got a bit carried away. i am making it a gsi replica, all my parts are off being sprayed in ford frozen whhite. i have bought full gaz coilovers and have tureted the rear inner arch to make them fit. i ahve also welded in a strenghening kit. made up a rear strubrace, i have now picked upa 1.6 16v engine with jenvey 40mm twin throttle bodies. i have dropped this engine in beofre my shel gets sprayed as i have had to cut out apart of my bulkhead to fit the bodies in . this is basically my project so far and would be happy to hear any comments or advise back thanks nicky
i cant seem to get it to work to put any pics on sorry can anyone tell me how eaxactly?
corsa b project
-
nom811
- CB-Uk Newbie
- Posts: 6
- Joined: Wed Jul 30, 2008 9:55 pm
- Location: penrith, cumbria
corsa b project
Last edited by nom811 on Thu Jul 31, 2008 10:10 pm, edited 1 time in total.
-
Chrex
- CB-Uk User
- Posts: 1176
- Joined: Mon May 21, 2007 10:56 pm
- Location: Pensby/Bromborough, Wirral
- Contact:
Re: corsa b project
Sounds spot on!
Be good to get some photos up but only good things come from the x16 on TB's!
Hope you keep this post up to date and in depth!
Be good to get some photos up but only good things come from the x16 on TB's!
Hope you keep this post up to date and in depth!