My aplolgies if this is in the wrong place
but i need some advice on how to deal with a rust hole appearing in the passanger door on my corsa flair
its pretty big and i want/need to get rid off it
so any advice would be great thanks
also how can i get rid off this huge scratch that sum little poo put on
its longer than that aswell
Need Help With Rust
- a1an_49
- CB-Uk User
- Posts: 100
- Joined: Thu Apr 10, 2008 4:32 pm
- Location: Wirral
-
- CB-Uk User
- Posts: 1176
- Joined: Mon May 21, 2007 10:56 pm
- Location: Pensby/Bromborough, Wirral
- Contact:
Re: Need Help With Rust
are they both on the same door?...
if so i'd be looking for a new one. he only way to solve both of them is that or a bodyshop! The rust needs taking back, treating and re-spraying. The scratch, looking at the dent that is also there, isnt repairable. the panel will be f**k.
if so i'd be looking for a new one. he only way to solve both of them is that or a bodyshop! The rust needs taking back, treating and re-spraying. The scratch, looking at the dent that is also there, isnt repairable. the panel will be f**k.
- a1an_49
- CB-Uk User
- Posts: 100
- Joined: Thu Apr 10, 2008 4:32 pm
- Location: Wirral
Re: Need Help With Rust
The rust is on the passenger door
and the scratch is on the drivers.
What do you mean by taking it back an treating it....? how do i do that, and what do i need?
i dont evan know what colour my car is to respray,
thanks
and the scratch is on the drivers.
What do you mean by taking it back an treating it....? how do i do that, and what do i need?
i dont evan know what colour my car is to respray,
thanks
-
- General Moderator
- Posts: 612
- Joined: Fri Aug 17, 2007 1:46 pm
- Location: glasgow
-
- CB-Uk User
- Posts: 1176
- Joined: Mon May 21, 2007 10:56 pm
- Location: Pensby/Bromborough, Wirral
- Contact:
Re: Need Help With Rust
well you grind/drill the rust off with a wire paint and rust remover attached to whichever tool.
Then prime it...(in grey) and then spray it in the carabic blue (33L).
you'll probs have to do quite a bit of the door tho to blend it...
Then prime it...(in grey) and then spray it in the carabic blue (33L).
you'll probs have to do quite a bit of the door tho to blend it...
-
- General Moderator
- Posts: 612
- Joined: Fri Aug 17, 2007 1:46 pm
- Location: glasgow
Re: Need Help With Rust
why not go to the scrappy and get a new door for a tenner then paint it ??
corsa 1.5TD's woo