hey guys, mu tempreture gauge dont work and i think i found out why, the big plug is connected but there is another wire thats menna connect onto sumat, any ideas where it connects to? can sum1 have a look on there car if they have the corsa sport. pic below cheers
tempreture plugs
Moderator: Octane2097
-
- CB-Uk User
- Posts: 202
- Joined: Mon Jan 07, 2008 12:07 am
- Location: Cleckheaton, West Yorkshire
Re: tempreture plugs
Someone correct me if im wrong but doesn't that look like a possible earth wire?
- LesterPiglet1
- CB-Uk User
- Posts: 398
- Joined: Mon Jun 09, 2008 9:11 pm
- Location: Bangor, Norn Iron
Re: tempreture plugs
If it's an exposed terminal it's an earth
-
- CB-Uk Newbie
- Posts: 8
- Joined: Thu Aug 21, 2008 5:19 pm
Re: tempreture plugs
ok cheers, so if i connect it to the chasis some where should sort theproblem?
will try tmrw, cheers
will try tmrw, cheers
-
- CB-Uk Newbie
- Posts: 3
- Joined: Sat May 30, 2009 7:16 am
Re: tempreture plugs
bit late but looks like the temp sender wire to me, look for a small hex nut with a central brass pin with what looks like a round pin sticking out the middle, get some one to turn on ignition and watch temp gauge whilst you touch this wire agaisnt an earth point, if gauge goes right up then this wire will go on the hex temder item i just mentioned. once engines running check to see if gauge starts to creep up to normal temp .
hope this helps shark1e
hope this helps shark1e