speedo inop-
Moderator: Octane2097
-
johny105
- CB-Uk Newbie
- Posts: 13
- Joined: Mon Oct 13, 2008 7:37 pm
Re: speedo inop-
well i got the generator out this aft, looks fine, so i'm tipping it'll be the same as you i'm now on my third cable ' £11 each vox wanted £63
"...for what good it has done me , i might aswell of stuck it up my arse.."
..the GTi will live again...only to die again...
Its not speed that kills.. its stopping quickly.
..the GTi will live again...only to die again...
Its not speed that kills.. its stopping quickly.
-
nwdaniel
- CB-Uk Newbie
- Posts: 12
- Joined: Mon Oct 13, 2008 8:09 pm
Re: speedo inop-
finally cracked it! We had to send the cable along the same route as the cluch cable until we came directly above the hole in the gearbox for the sender.
then we had to change the route as the is alot of pipe & wiring forces the cable to be at a sharp angle hense the snapping. So we decided to thread the cable through without being attached to the sender and made sure there were no sharp angles in the cable. Then simply screwed it to the sender & reattached to the gear box. Done!
fingers crossed i did 30m yeasterday and its still working.
P.O.I this time i got the cable from Allwoods for £10 so you may not need to go the vox one
then we had to change the route as the is alot of pipe & wiring forces the cable to be at a sharp angle hense the snapping. So we decided to thread the cable through without being attached to the sender and made sure there were no sharp angles in the cable. Then simply screwed it to the sender & reattached to the gear box. Done!
fingers crossed i did 30m yeasterday and its still working.
P.O.I this time i got the cable from Allwoods for £10 so you may not need to go the vox one