Corsa 1.4 16valve
-
- CB-Uk Newbie
- Posts: 38
- Joined: Tue Sep 30, 2008 8:43 pm
Re: Corsa 1.4 16valve
i dont think you will again alot from porting and polishing your head, as my mate does rallying with vauxhall engines.
if you want a very quick car get a gte nova gearbox(f13) and put a 4;1 diff in it will give you 107mph at 6000rpm.and very rapid!!!!!!! i did in in my gte group 'n' rallly car and it was so quick say good bye to scooby up to about 80mph would do it to my corsa but i use the motor way alot.
if you want a very quick car get a gte nova gearbox(f13) and put a 4;1 diff in it will give you 107mph at 6000rpm.and very rapid!!!!!!! i did in in my gte group 'n' rallly car and it was so quick say good bye to scooby up to about 80mph would do it to my corsa but i use the motor way alot.
-
- CB-Uk User
- Posts: 1145
- Joined: Tue Jun 24, 2008 11:20 pm
- Location: Manchester
Re: Corsa 1.4 16valve
my car has done 122 on the motorway std i dont understand how but it redlines at like 6800
ask ur mate if he got an ex rally engine i can buy off him lol
1.4 or more
ask ur mate if he got an ex rally engine i can buy off him lol
1.4 or more
And I am back in a B after all these years whoop
-
- CB-Uk User
- Posts: 1145
- Joined: Tue Jun 24, 2008 11:20 pm
- Location: Manchester
Re: Corsa 1.4 16valve
i want to know if i lowermy car 60 mm i will have any problems
or will 40 not be enough
helllpp
and the suspension kit offf ebay is 129.99 is that too cheep or will it work just fine
or will 40 not be enough
helllpp
and the suspension kit offf ebay is 129.99 is that too cheep or will it work just fine
And I am back in a B after all these years whoop
-
- CB-Uk Newbie
- Posts: 38
- Joined: Tue Sep 30, 2008 8:43 pm
Re: Corsa 1.4 16valve
he's on coilovers as he had to adjust heights for each event.like forest and tarmac ect....
why do you think im waiting after x-mas a bargain might pop up lo
why do you think im waiting after x-mas a bargain might pop up lo
-
- CB-Uk User
- Posts: 1145
- Joined: Tue Jun 24, 2008 11:20 pm
- Location: Manchester
Re: Corsa 1.4 16valve
yes but i am asking if it will be ok
and go 4 it
just tell him u want the whole car ahah
and go 4 it
just tell him u want the whole car ahah
And I am back in a B after all these years whoop
-
- CB-Uk User
- Posts: 1176
- Joined: Mon May 21, 2007 10:56 pm
- Location: Pensby/Bromborough, Wirral
- Contact:
Re: Corsa 1.4 16valve
dan, if you're gonna drop 60mm, you HAVE to ensure your wheels are thhe right offset. that is the only thing stopping you from dropping it.
You ideally want some wheels wit ET45-49. Vaux ones are ET49, so if you can get some of them, you will have no worries. ET45 you will get away with, so long as the wheels arent 7J. I had problems wit my Pro Race's on my daily because they were ET45 and 7j, so they scrubbed a little.
But if you have the correct offset, there will be no worries!
You ideally want some wheels wit ET45-49. Vaux ones are ET49, so if you can get some of them, you will have no worries. ET45 you will get away with, so long as the wheels arent 7J. I had problems wit my Pro Race's on my daily because they were ET45 and 7j, so they scrubbed a little.
But if you have the correct offset, there will be no worries!
-
- CB-Uk User
- Posts: 1145
- Joined: Tue Jun 24, 2008 11:20 pm
- Location: Manchester
Re: Corsa 1.4 16valve
you must know everything about a corsa lol
and how do i check the offsets
is it the wheel as mine are the "universal" ones with about 8 holes in them lol
and how do i check the offsets
is it the wheel as mine are the "universal" ones with about 8 holes in them lol
And I am back in a B after all these years whoop
-
- CB-Uk User
- Posts: 188
- Joined: Sat Aug 23, 2008 7:27 pm
Re: Corsa 1.4 16valve
chrex is the Corsa B GURU :p
-
- CB-Uk User
- Posts: 1145
- Joined: Tue Jun 24, 2008 11:20 pm
- Location: Manchester
-
- CB-Uk User
- Posts: 1145
- Joined: Tue Jun 24, 2008 11:20 pm
- Location: Manchester
Re: Corsa 1.4 16valve
wel;ll it now looks like i am buying a GSI engine off Adam
lets hope it deliveres better then the poo one i got atm
just need a few things for it
any one got another gsi engine for breaking
haha
lets hope it deliveres better then the poo one i got atm
just need a few things for it
any one got another gsi engine for breaking
haha
And I am back in a B after all these years whoop
-
- CB-Uk User
- Posts: 1176
- Joined: Mon May 21, 2007 10:56 pm
- Location: Pensby/Bromborough, Wirral
- Contact:
Re: Corsa 1.4 16valve
you really need to stop gettin Adam and Paul mixed up!!
Adam knows alot more than i do, and i learned most of my stuff from him!...
The offset should be stamped into the back of the wheels somewhere. Either on the spokes or in the centre somewhere. If indeed they did put it on at all.
If its multifit, the likelihood is that they are ET38ish.
Adam knows alot more than i do, and i learned most of my stuff from him!...
The offset should be stamped into the back of the wheels somewhere. Either on the spokes or in the centre somewhere. If indeed they did put it on at all.
If its multifit, the likelihood is that they are ET38ish.
-
- CB-Uk User
- Posts: 1145
- Joined: Tue Jun 24, 2008 11:20 pm
- Location: Manchester
Re: Corsa 1.4 16valve
im O_o poo me
i dnt do names ahah im sorry
but i really want to get the engine back and rebuild it
lightweight everything
i hope it isnt expensive lol
and do you think my mum will let me use a room in my house for a mechanics room
i dnt do names ahah im sorry
but i really want to get the engine back and rebuild it
lightweight everything
i hope it isnt expensive lol
and do you think my mum will let me use a room in my house for a mechanics room
And I am back in a B after all these years whoop
-
- CB-Uk User
- Posts: 188
- Joined: Sat Aug 23, 2008 7:27 pm
Re: Corsa 1.4 16valve
i think your mum wont mind tbh if you give her first diips on driving the car :p
-
- CB-Uk User
- Posts: 1145
- Joined: Tue Jun 24, 2008 11:20 pm
- Location: Manchester
Re: Corsa 1.4 16valve
NEVER i am the first to drive the car i am not even going to let the garage who is doing most of the work drive it its my baby and mine only lol but she can however have first diips on making brews
And I am back in a B after all these years whoop
- Harkus
- CB-Uk User
- Posts: 655
- Joined: Mon Nov 10, 2008 4:11 pm
- Location: Barry, South Wales
- Contact:
Re: Corsa 1.4 16valve
for god sake fella dont put lex-ars lights on a corsa! i hate them with a passion so much! apsolute chaved up if you ask me!
as for the green neons dont put them on just yet untill you get the kit othe wise its jsut going to look silly with the tubes there.. get the kit to hide them first dude
as for the green neons dont put them on just yet untill you get the kit othe wise its jsut going to look silly with the tubes there.. get the kit to hide them first dude
My corsa sport build thread - http://forums.corsa-b.co.uk/viewtopic.php?t=20200