hey guys just wonderin would 01 style renault megane wheels go straight on a corsa???
Cheers Thanks
Joe
Megane wheels??
Moderator: Octane2097
-
- CB-Uk Newbie
- Posts: 47
- Joined: Wed Feb 20, 2008 11:02 pm
- Location: Ireland
Megane wheels??
Gettin there...
-
- CB-Uk User
- Posts: 1176
- Joined: Mon May 21, 2007 10:56 pm
- Location: Pensby/Bromborough, Wirral
- Contact:
Re: Megane wheels??
i think the offset is wrong pal. The PCD is right but the offset is way out around 35ish i think. Just check on the wheel and see what it says, you are looking for an ET##. You ideally want it to be about 45-49.
-
- CB-Uk User
- Posts: 1145
- Joined: Tue Jun 24, 2008 11:20 pm
- Location: Manchester
-
- CB-Uk Newbie
- Posts: 47
- Joined: Wed Feb 20, 2008 11:02 pm
- Location: Ireland
-
- CB-Uk User
- Posts: 1176
- Joined: Mon May 21, 2007 10:56 pm
- Location: Pensby/Bromborough, Wirral
- Contact:
Re: Megane wheels??
they would, but they're even further off than the renault ones. Depends what style you are going for.
If you can, try the renault ones and see how much clearance you have got. is the car lowered or are you planning to lower it? You will probs get away with it so long as you dont go lower than 40mm.
If you can, try the renault ones and see how much clearance you have got. is the car lowered or are you planning to lower it? You will probs get away with it so long as you dont go lower than 40mm.
-
- CB-Uk Newbie
- Posts: 47
- Joined: Wed Feb 20, 2008 11:02 pm
- Location: Ireland
Re: Megane wheels??
I was plannin on lowering her by 40, i photoshoped the megane wheels onto a pic of my car and they look sweet, and different to any other set iv seen... and i can get them reall cheap too
Gettin there...