My Corsa 1.2 Twist project.....
-
- CB-Uk Newbie
- Posts: 14
- Joined: Wed Nov 05, 2008 9:37 pm
My Corsa 1.2 Twist project.....
Well i brought the car back in January, it had 140,000 on the clock, and was rattling like a skeleton in a biscuit tin
here's wot she looked like after 245 quid ebay buy later......
well after a good service, leads, dizzy, arm, plugs air/oil filter, coolant, oil, brakes, handbrake cable, and a water pump later (this was the rattling noise ) i gave her a good clean and wax.....
here's wot she looked like after 245 quid ebay buy later......
well after a good service, leads, dizzy, arm, plugs air/oil filter, coolant, oil, brakes, handbrake cable, and a water pump later (this was the rattling noise ) i gave her a good clean and wax.....
-
- CB-Uk Newbie
- Posts: 14
- Joined: Wed Nov 05, 2008 9:37 pm
Re: My Corsa 1.2 Twist project.....
well this was how she stayed really but i march i did have a little bump...
well i eventually decided that i would do a few bits to the car, so i brought a central clock display, glovebox, i got rid of that horrid interior with a full GSi interior, though i did make a few adjustments like keeping my manual windows and mirrors, GSi clocks too. I also fitted some clear side repeaters, i have also brought a GSi spoiler too but not fitted it yet
this is how she stood...
and this was me trying the spoiler on
well i eventually decided that i would do a few bits to the car, so i brought a central clock display, glovebox, i got rid of that horrid interior with a full GSi interior, though i did make a few adjustments like keeping my manual windows and mirrors, GSi clocks too. I also fitted some clear side repeaters, i have also brought a GSi spoiler too but not fitted it yet
this is how she stood...
and this was me trying the spoiler on
-
- CB-Uk Newbie
- Posts: 14
- Joined: Wed Nov 05, 2008 9:37 pm
Re: My Corsa 1.2 Twist project.....
i have also debadged the boot lid
i brought a new bumper to replace the damaged one (also brought new arch trims but they'll be fitted end of Nov)
brought this for a bargain 22 quid...JR filter
then brought these off ebay...
had them powder coated....(they'll be on @ end of Nov too)
also brought these
and very quickly fitted them
i brought a new bumper to replace the damaged one (also brought new arch trims but they'll be fitted end of Nov)
brought this for a bargain 22 quid...JR filter
then brought these off ebay...
had them powder coated....(they'll be on @ end of Nov too)
also brought these
and very quickly fitted them
-
- CB-Uk Newbie
- Posts: 14
- Joined: Wed Nov 05, 2008 9:37 pm
Re: My Corsa 1.2 Twist project.....
and that's pretty much where she now stands, just brought a 2.0 8v MKII Cav SRi 130 engine this week off ebay, and will be collecting that at the end of the month
the F16WR box will do for now but will get a F16CR later on
thanks for looking
the F16WR box will do for now but will get a F16CR later on
thanks for looking
-
- CB-Uk User
- Posts: 1176
- Joined: Mon May 21, 2007 10:56 pm
- Location: Pensby/Bromborough, Wirral
- Contact:
Re: My Corsa 1.2 Twist project.....
hmm...looking forward to seeing the wheels on it. I will shortly be splitting my corsa, and i have a late spec front bumper and slatted grille which will be for sale.
Look great and both in good nick. Will let you know.
Good to see you've taken the 8v route as well...but be sure to check on the block that it is an SEH! Easy enough for people to say it is when in reality, it's an NE.
A few simple mods and it will look spot on. Also, with the conversion, make sure you do everything properly e.g. gear linkage, exhaust...as it is well worth it.
Look great and both in good nick. Will let you know.
Good to see you've taken the 8v route as well...but be sure to check on the block that it is an SEH! Easy enough for people to say it is when in reality, it's an NE.
A few simple mods and it will look spot on. Also, with the conversion, make sure you do everything properly e.g. gear linkage, exhaust...as it is well worth it.
-
- CB-Uk Newbie
- Posts: 14
- Joined: Wed Nov 05, 2008 9:37 pm
Re: My Corsa 1.2 Twist project.....
thanks for the reply, i'll definitely be making sure it's all fitted right and i'll check when i go pick the engine up
-
- CB-Uk Newbie
- Posts: 24
- Joined: Fri Oct 10, 2008 9:09 pm
Re: My Corsa 1.2 Twist project.....
hey, ive got the except same corsa as that and have done the same sorts of the things to the interior! Do the twists only come in that torquiose colour? ive only ever seem them that colour lol.
Also did u fit a different instrument panel to it? Mine didnt have a rev counter (tachometer) in it and was wondering how hard they are to fit?
Also did u fit a different instrument panel to it? Mine didnt have a rev counter (tachometer) in it and was wondering how hard they are to fit?
-
- CB-Uk User
- Posts: 188
- Joined: Sat Aug 23, 2008 7:27 pm
Re: My Corsa 1.2 Twist project.....
looks nice so far pretty tidy inside for that price on ebay..
-
- CB-Uk Newbie
- Posts: 15
- Joined: Wed Nov 12, 2008 1:24 am
Re: My Corsa 1.2 Twist project.....
with your new instrument cluster is 6000rpm the actual redline of your car. because i have the 1.2L its max power 45hp is achieved at 5000rpm but i have no idea where the redline is?
-
- CB-Uk Newbie
- Posts: 14
- Joined: Wed Nov 05, 2008 9:37 pm
Re: My Corsa 1.2 Twist project.....
sorry mate can't help as my rev counter isn't connected up yet, waiting the new engine
- Harkus
- CB-Uk User
- Posts: 655
- Joined: Mon Nov 10, 2008 4:11 pm
- Location: Barry, South Wales
- Contact:
Re: My Corsa 1.2 Twist project.....
starting to get there fella
love the lue and grey seats looks like an airtours plane interior .
love the lue and grey seats looks like an airtours plane interior .
My corsa sport build thread - http://forums.corsa-b.co.uk/viewtopic.php?t=20200
-
- CB-Uk Newbie
- Posts: 14
- Joined: Wed Nov 05, 2008 9:37 pm
Re: My Corsa 1.2 Twist project.....
Harkus wrote:starting to get there fella
love the lue and grey seats looks like an airtours plane interior .
lol thanks
-
- General Moderator
- Posts: 612
- Joined: Fri Aug 17, 2007 1:46 pm
- Location: glasgow
-
- CB-Uk User
- Posts: 1145
- Joined: Tue Jun 24, 2008 11:20 pm
- Location: Manchester
Re: My Corsa 1.2 Twist project.....
looking good pal that engine looks mint
And I am back in a B after all these years whoop
-
- CB-Uk Newbie
- Posts: 14
- Joined: Wed Nov 05, 2008 9:37 pm
Re: My Corsa 1.2 Twist project.....
thanks for the replies everyone, looking forward to travelling down to collect the engine next week now