orite guys
iv written on here before about this problem so you mite be gettin bored of me by now!
any ideas what is the matter with my 1.2 sxi...
it hesitates on acceleration even at really low speeds and the engine management light comes on when going around 70mph, the revs reach a point where the car does not pull
i have replaced:
02 sensor
CAT and middle box
speed sensor
and also there is NO faults coming up on the diagnostics!
I HAVE BEEN TOLD IT COULD BE THAT THE CLUTCH IS SLIPPING BECAUSE THERE IS OIL LEAKING ON TO IT?
OR SHALL I CLEAN THE THROTTLE BODY?
OR WHAT ELSE CAN IT BE?
thanks in advance!
need to fix it to sell
Moderator: Octane2097
-
- CB-Uk User
- Posts: 202
- Joined: Mon Jan 07, 2008 12:07 am
- Location: Cleckheaton, West Yorkshire
Re: need to fix it to sell
Sounds like the annoying Mass Air Flow Meter again.
Has the same problem with mine. Changed every sensor but unlucky for me also had a faulty ECU that was damaged by two wires between the ECU and Air Flow Meter that was shorting out.
I'd certainly change the air flow meter next.
Dan
Has the same problem with mine. Changed every sensor but unlucky for me also had a faulty ECU that was damaged by two wires between the ECU and Air Flow Meter that was shorting out.
I'd certainly change the air flow meter next.
Dan
-
- CB-Uk User
- Posts: 1176
- Joined: Mon May 21, 2007 10:56 pm
- Location: Pensby/Bromborough, Wirral
- Contact:
Re: need to fix it to sell
i'm afraid i have no experience with this engine! In the x14/16, it could possibly be the throttle position sensor. is it a 16 or 8v 1.2??
Cleaning the TB doesnt sound like it will make a difference. Have you tried changing the fuel filter?? thats a possiblity you know, if its clogged...it may not be getting the required fuel pressure.
Cleaning the TB doesnt sound like it will make a difference. Have you tried changing the fuel filter?? thats a possiblity you know, if its clogged...it may not be getting the required fuel pressure.
-
- CB-Uk User
- Posts: 94
- Joined: Sun Aug 24, 2008 4:53 pm
Re: need to fix it to sell
yeh replaced the fuel filter aswel now
im thinking its going to be the EGR valve that im going to replace
and if its not that then my car is basically O_o!
im thinking its going to be the EGR valve that im going to replace
and if its not that then my car is basically O_o!
-
- CB-Uk User
- Posts: 202
- Joined: Mon Jan 07, 2008 12:07 am
- Location: Cleckheaton, West Yorkshire
Re: need to fix it to sell
Whats the engine code? X12XE ?
If so will be Air Flow Meter.
If so will be Air Flow Meter.
-
- CB-Uk User
- Posts: 94
- Joined: Sun Aug 24, 2008 4:53 pm
Re: need to fix it to sell
yeh it is..
no faults came up on the diagnostics computer and its 200notes for a air flow meter isnt it?
the EML only comes on when the engine is really struggling, not all the time...
no faults came up on the diagnostics computer and its 200notes for a air flow meter isnt it?
the EML only comes on when the engine is really struggling, not all the time...
-
- CB-Uk User
- Posts: 202
- Joined: Mon Jan 07, 2008 12:07 am
- Location: Cleckheaton, West Yorkshire
Re: need to fix it to sell
My car was doing exactly the same thing.
I'm 90% sure it will be your Air Flow Meter. Mine never reported any faults either.
You can buy them ebay new Bosch one for around £80 or an cheap aftermarket one for around £35 but I wouldn't recommend the cheaper one as when I tryed the car hesitated more than before but never got the warning light on. Easy to change over as well.
http://shop.ebay.co.uk/items/_W0QQ_nkwZ ... R40QQ_mdoZ
Dan
I'm 90% sure it will be your Air Flow Meter. Mine never reported any faults either.
You can buy them ebay new Bosch one for around £80 or an cheap aftermarket one for around £35 but I wouldn't recommend the cheaper one as when I tryed the car hesitated more than before but never got the warning light on. Easy to change over as well.
http://shop.ebay.co.uk/items/_W0QQ_nkwZ ... R40QQ_mdoZ
Dan
-
- CB-Uk User
- Posts: 94
- Joined: Sun Aug 24, 2008 4:53 pm
Re: need to fix it to sell
haha okay cheers mate, il let u know how it goes, YOU BETTER BE RIGHT THOUGH! :L
-
- CB-Uk User
- Posts: 94
- Joined: Sun Aug 24, 2008 4:53 pm
Re: need to fix it to sell
fittted the MASS AIR FLOW METER! that problems fixed
BUT
the initial throttle reponse is to lose revs and nearly stall, then picks up and pulls how it should!
and when driving in 2nd doing 20/30 mph, if i lift off the accelerator, it gets all jerky?
ideas?
BUT
the initial throttle reponse is to lose revs and nearly stall, then picks up and pulls how it should!
and when driving in 2nd doing 20/30 mph, if i lift off the accelerator, it gets all jerky?
ideas?
-
- CB-Uk User
- Posts: 1145
- Joined: Tue Jun 24, 2008 11:20 pm
- Location: Manchester
Re: need to fix it to sell
it could be that ur engine mount rubbers are going
orrrr it could be that an engine mount has gone worst case tho but ud of noticed that
orrrr it could be that an engine mount has gone worst case tho but ud of noticed that
And I am back in a B after all these years whoop