lil hooligan

[dancotton2003]

very very true

i hope it all goes to plan good luck pal

[Adam-D]

well today made a little progress, between helpin chris and doing mine.

i tapped a thread into the head for the egr port. and then found a bolt that fitted, cut it down a bit and added some firegum and a sump washer to seal it good

tap


bolt in egr port



then i fitted the exhaust manifold



then i cut the hole in the egr port on the inlet manifold gasket bigger to accomodate the blank bolt, and fitted up the inlet



and then i made a gasket up and fitted the cut down crankcase breather pipe to the back of the engine., no pics as it went dark

[CorsaTD]

keep up the good work man!! looks good

[Adam-D]

wings are on, headlights are in, coil is fitted, horn is fitted on a custon yet wobbly bracket lol






and my custom hoses turned up

[dancotton2003]

wooo looking forward to see this when i come up lol

[LeKiffeur]

Put a radiator for air conditioning, there is greater !

[Adam-D]

cant, got a tank going in the small gap. plus it will be ample cooling for the 8v

new hoses fitted

[Adam-D]

couple of bits turned up

[Adam-D]

red doors fitted


dash fitted, just "lots of kicking and levering past the cage"

[Adam-D]

header tank and fpr fitted

[CorsaTD]

is that radiator bigget than a standard corsa radiator??

[Adam-D]

no its a 1.4sri 8v one.

which is ample cosidering the use it'll get

[CorsaTD]

kool.... was wondering how do you stop a 2 liter engine from over heating if u are using a smaller radiator...? does it really affect the over heating problem coz when i put the foot down in ym corsa it would heat up quite quickly btu ma rad was fooked... lol

[Adam-D]

ive seen a c20xe run fine on a 1.0 12v rad.

as long as the system is clear the pump is good and the matrix is clear with good quality coolent it will be fine

[CorsaTD]

good to hear coz i jsut dont want my next corsa doing the same thing lol
gona fit an oil cooler also to mine lol