central locking

[LilLew]

--------------------------------------------------------------------------------

1997 Corsa B 1.2 LS 3 door
i have installed a thrid party central locking kit but it does not work i have looked at the tutorial on here but i am unable to see the pictures so i can not have a proper look any help

So far
Connected the door motors driver and passenger
Wired loom from battery to door motors

there are still two wires that i have not connected because i dont know were they go it is a brown wire and a white wire i think they might be remote wires but bugga know what for
there where no instruction when i brought this kit

any suggests will help

[RenRenRen]

Does it look like this? If so the spare brown/white cables are for connecting it to an alarm system if you have one.

If that is the one, let me know & I'll upload a copy of the installation instructions for you.

[LilLew]

take away the two fobs and that is my kit key entry only

[RenRenRen]

Scanned it in, then noticed it's actually on the manufacturer's site here

The non-remote version is the Hawk CDL-04, is the inline fuse on the red wire before the control unit still good? Only the 5 wire (master) motor can activate the others, so make sure you're testing with that one rather than the 2 wire motors as you'll get nothing from them.

[LilLew]

my two front door motors are five wire each and yes the fuse is fine