What would you do?
Moderator: Octane2097
-
- CB-Uk Newbie
- Posts: 32
- Joined: Wed Feb 04, 2009 5:16 pm
What would you do?
I have just taken off my bumper things off my doors and im left with all this sticky glue! what is the best and easiest way to get it off? cheers
see how long it takes me to be pulled with my red sidelights :)
-
- CB-Uk User
- Posts: 963
- Joined: Sat Jan 24, 2009 11:50 pm
Re: What would you do?
hot water, bug and tar remover and a scrap credit card or milk bottle.....then lots of patience and elbow grease when scrubbing with tar remover and kitchen sponge.
Fighting for Peace is Like Fornicating for Virginity
-
- CB-Uk User
- Posts: 311
- Joined: Wed Dec 03, 2008 1:32 pm
Re: What would you do?
when doing the boot, after I'd finished, it felt like I'd pleasured a thousand dirty old men.
My arm was killing. I don't think I'd be able to do one bumpstrip in a day, lol. Let alone two!
My arm was killing. I don't think I'd be able to do one bumpstrip in a day, lol. Let alone two!
-[b][color=#FF0000]S[/color][color=#FF8000]a[/color][color=#FFFF00]i[/color][color=#40FF40]d[/color] [color=#0080FF]R[/color][color=#BF00FF]o[/color][color=#FF0000]o[/color][color=#FF8000]t[/color][/b]
- roperstun
- CB-Uk User
- Posts: 1455
- Joined: Mon Feb 16, 2009 10:18 pm
- Location: newport shropshire
Re: What would you do?
i used a heat gun a old card and a rag and i got all badges and both strips of in a couple of hours my arm did ache after though
[size=150][color=#4080BF] PVS next year?
i think so :) [/color][/size]
i think so :) [/color][/size]
-
- CB-Uk User
- Posts: 963
- Joined: Sat Jan 24, 2009 11:50 pm
Re: What would you do?
just finished doing the passenger side and the rear panel strip on driver side. was pretty easy really just kept dowsing the glue with boiling water straight from the kettle on a kitchen sponge. then scrub scrub scrub. My arm was kanin from it but it looks much better. it much easier with a new soft non scratch pan scourer, but once it bogged up with glue starts to get difficult. i used two so far and will use a 3rd tommorow but they only cheap.
Fighting for Peace is Like Fornicating for Virginity
-
- CB-Uk User
- Posts: 311
- Joined: Wed Dec 03, 2008 1:32 pm
Re: What would you do?
boiling water straight from kettle? I was afraid to try that in case it damaged the paintwork.jar_jar89 wrote:just finished doing the passenger side and the rear panel strip on driver side. was pretty easy really just kept dowsing the glue with boiling water straight from the kettle on a kitchen sponge. then scrub scrub scrub. My arm was kanin from it but it looks much better. it much easier with a new soft non scratch pan scourer, but once it bogged up with glue starts to get difficult. i used two so far and will use a 3rd tommorow but they only cheap.
I did use hot water but not boiling.
-[b][color=#FF0000]S[/color][color=#FF8000]a[/color][color=#FFFF00]i[/color][color=#40FF40]d[/color] [color=#0080FF]R[/color][color=#BF00FF]o[/color][color=#FF0000]o[/color][color=#FF8000]t[/color][/b]