the shocks are standard, coilovers are the next thing to be getting done hopefullyiToMo x wrote:Have you got shocks on that aswell ?
If so how much and where you get them from ?
Corsa V6 project
- mradz
- CB-Uk User
- Posts: 364
- Joined: Sat Nov 22, 2008 6:31 pm
- Location: Northants
- Contact:
Re: Corsa V6 project
-
- CB-Uk User
- Posts: 1176
- Joined: Mon May 21, 2007 10:56 pm
- Location: Pensby/Bromborough, Wirral
- Contact:
Re: Corsa V6 project
that must handle worse than paul's omega! V6 in the front wit 60mm springs and standard shocks...forget boat, that must be a ferry!
-
- CB-Uk User
- Posts: 691
- Joined: Thu Apr 09, 2009 9:54 pm
Re: Corsa V6 project
PMSL!!!!Chrex wrote:that must handle worse than paul's omega! V6 in the front wit 60mm springs and standard shocks...forget boat, that must be a ferry!
VW Bora Highline 150 TDi
- roperstun
- CB-Uk User
- Posts: 1455
- Joined: Mon Feb 16, 2009 10:18 pm
- Location: newport shropshire
Re: Corsa V6 project
that engine looks sexual
the handling must be shocking doe
the handling must be shocking doe
[size=150][color=#4080BF] PVS next year?
i think so :) [/color][/size]
i think so :) [/color][/size]
- mradz
- CB-Uk User
- Posts: 364
- Joined: Sat Nov 22, 2008 6:31 pm
- Location: Northants
- Contact:
Rolling road
Another forum i'm on organised a rolling road day, so i thought i would take the corsa along to see what it is putting out.
unfortunatly it didn't wanna stay in the rollers, so had to be helped a little
and the results
it doesn't handle that badly considering the rather poor suspension set up! Is rather bumpy though they are not actually 60mm springs at the front but the extra weight takes it down to about 60mm. It is only being used as a temp set upto until i get around to sorting coilovers and ARB's to sort out the handling properly.
unfortunatly it didn't wanna stay in the rollers, so had to be helped a little
and the results
it doesn't handle that badly considering the rather poor suspension set up! Is rather bumpy though they are not actually 60mm springs at the front but the extra weight takes it down to about 60mm. It is only being used as a temp set upto until i get around to sorting coilovers and ARB's to sort out the handling properly.
Last edited by mradz on Sun Apr 19, 2009 7:04 pm, edited 1 time in total.
- Mike_Parr
- CB-Uk User
- Posts: 1049
- Joined: Tue Feb 24, 2009 6:10 pm
- Location: Birmingham, UK
Re: Corsa V6 project
189 bhp
Harkus Wrote: Lol I was actually racing a ford focus going through the tunnels making a noise was 5th missed 4th hit 2nd...at 70mph...driving like lad shifting like a woman LOL
-
- CB-Uk User
- Posts: 691
- Joined: Thu Apr 09, 2009 9:54 pm
-
- CB-Uk Newbie
- Posts: 1
- Joined: Sun Apr 19, 2009 7:20 pm
Re: Corsa V6 project
hi,did your v6 calipers go str8 on or did you have to change the hub carriers too, thanks, paul
- danthemann
- CB-Uk User
- Posts: 3469
- Joined: Sat Jan 10, 2009 3:42 am
- Location: Reading/Basingstoke area
Re: Corsa V6 project
that dont seem alot for a 2.5l v6
corsa b-tick! civic ej9 1.4 sohc-tick! civic coupe ej6 1.6 sohc-tick! CRX 16V 1.6 dohc-tick! MB6 VTI Civic 1.8 DOHC-tick! EK4 Vti-tick! EJ9 Civic-current project!
- mradz
- CB-Uk User
- Posts: 364
- Joined: Sat Nov 22, 2008 6:31 pm
- Location: Northants
- Contact:
Re: Corsa V6 project
standard V6 power is between 160 - 180bhp ish, depending on which model vec you have. Most V6 engines come out up on power though. 189 bhp is fairly good for what is essentially a standard V6 engine.danthemann wrote:that dont seem alot for a 2.5l v6
V6 calipers will go straight on your car however you will need the discs re-drilled for 4-stud. you can buy them ready drilled from LMF amongst others. Was gonna have a look, but their website is down.paulzblack16v wrote:hi,did your v6 calipers go str8 on or did you have to change the hub carriers too, thanks, paul
- mradz
- CB-Uk User
- Posts: 364
- Joined: Sat Nov 22, 2008 6:31 pm
- Location: Northants
- Contact:
Update
Last few bits to get the Log upto date.
Depo smoked Headlights
Smoked side repeaters
Painted Calipers
Made a start on install (this is what i made for my previous Corsa GSi) looks a mess but only chucked in ready to begin when time permits
also fitted a pioneer headunit i had lying around.
Depo smoked Headlights
Smoked side repeaters
Painted Calipers
Made a start on install (this is what i made for my previous Corsa GSi) looks a mess but only chucked in ready to begin when time permits
also fitted a pioneer headunit i had lying around.
- Mike_Parr
- CB-Uk User
- Posts: 1049
- Joined: Tue Feb 24, 2009 6:10 pm
- Location: Birmingham, UK
Re: Corsa V6 project
Looking nice, I like to painted calipers and those smoked headlights are to die for
Harkus Wrote: Lol I was actually racing a ford focus going through the tunnels making a noise was 5th missed 4th hit 2nd...at 70mph...driving like lad shifting like a woman LOL
- corsaboi1992
- CB-Uk User
- Posts: 1177
- Joined: Tue Oct 14, 2008 8:58 pm
- Location: tiptree
Re: Corsa V6 project
tha s 1 sweet BIG engine there m8 i like i like alot
join our (matty101) site (just made) http://simply-vauxhall.forumotion.com
-
- CB-Uk Newbie
- Posts: 36
- Joined: Sun Feb 22, 2009 10:20 am
- Location: Jedburgh, Borders
Re: Corsa V6 project
I think I have just wet myself 189 bhp in a car that weighs less than a shoebox and looks pretty standard on the outside!!!
All I can say is...............GO FIND THEM SAXOS
That is amazing
All I can say is...............GO FIND THEM SAXOS
That is amazing
Creating a showcar out of a Corsa Merit
- danthemann
- CB-Uk User
- Posts: 3469
- Joined: Sat Jan 10, 2009 3:42 am
- Location: Reading/Basingstoke area
Re: Corsa V6 project
yeh that is good for standard-but u get what i mean about how it doesnt sound alot? i know it is alot for the car
and yeh thats a plan about finding saxos..or some flash mateys in beemers
and yeh thats a plan about finding saxos..or some flash mateys in beemers
corsa b-tick! civic ej9 1.4 sohc-tick! civic coupe ej6 1.6 sohc-tick! CRX 16V 1.6 dohc-tick! MB6 VTI Civic 1.8 DOHC-tick! EK4 Vti-tick! EJ9 Civic-current project!