Corsa V6 project

For New & Continuing Projects Only.
NOT for past projects or questions.
User avatar
mradz
CB-Uk User
Posts: 364
Joined: Sat Nov 22, 2008 6:31 pm
Location: Northants
Contact:

Re: Corsa V6 project

Post by mradz »

iToMo x wrote:Have you got shocks on that aswell ?
If so how much and where you get them from ?
the shocks are standard, coilovers are the next thing to be getting done hopefully :lol:
Chrex
CB-Uk User
Posts: 1176
Joined: Mon May 21, 2007 10:56 pm
Location: Pensby/Bromborough, Wirral
Contact:

Re: Corsa V6 project

Post by Chrex »

that must handle worse than paul's omega! :? V6 in the front wit 60mm springs and standard shocks...forget boat, that must be a ferry!
iToMo x
CB-Uk User
Posts: 691
Joined: Thu Apr 09, 2009 9:54 pm

Re: Corsa V6 project

Post by iToMo x »

Chrex wrote:that must handle worse than paul's omega! :? V6 in the front wit 60mm springs and standard shocks...forget boat, that must be a ferry!
PMSL!!!! :lol:
VW Bora Highline 150 TDi
User avatar
roperstun
CB-Uk User
Posts: 1455
Joined: Mon Feb 16, 2009 10:18 pm
Location: newport shropshire

Re: Corsa V6 project

Post by roperstun »

that engine looks sexual :drool:

the handling must be shocking doe
[size=150][color=#4080BF] PVS next year?

i think so :) [/color][/size]
User avatar
mradz
CB-Uk User
Posts: 364
Joined: Sat Nov 22, 2008 6:31 pm
Location: Northants
Contact:

Rolling road

Post by mradz »

Another forum i'm on organised a rolling road day, so i thought i would take the corsa along to see what it is putting out.

Image
Image

unfortunatly it didn't wanna stay in the rollers, so had to be helped a little

Image

and the results

Image


it doesn't handle that badly considering the rather poor suspension set up! Is rather bumpy though :lol: they are not actually 60mm springs at the front but the extra weight takes it down to about 60mm. It is only being used as a temp set upto until i get around to sorting coilovers and ARB's to sort out the handling properly. :)
Last edited by mradz on Sun Apr 19, 2009 7:04 pm, edited 1 time in total.
User avatar
Mike_Parr
CB-Uk User
Posts: 1049
Joined: Tue Feb 24, 2009 6:10 pm
Location: Birmingham, UK

Re: Corsa V6 project

Post by Mike_Parr »

189 bhp :D
Harkus Wrote: Lol I was actually racing a ford focus going through the tunnels making a noise was 5th missed 4th hit 2nd...at 70mph...driving like lad shifting like a woman LOL :lol:
iToMo x
CB-Uk User
Posts: 691
Joined: Thu Apr 09, 2009 9:54 pm

Re: Corsa V6 project

Post by iToMo x »

WoW :shock:
VW Bora Highline 150 TDi
paulzblack16v
CB-Uk Newbie
Posts: 1
Joined: Sun Apr 19, 2009 7:20 pm

Re: Corsa V6 project

Post by paulzblack16v »

hi,did your v6 calipers go str8 on or did you have to change the hub carriers too, thanks, paul
User avatar
danthemann
CB-Uk User
Posts: 3469
Joined: Sat Jan 10, 2009 3:42 am
Location: Reading/Basingstoke area

Re: Corsa V6 project

Post by danthemann »

that dont seem alot for a 2.5l v6 :?
corsa b-tick! civic ej9 1.4 sohc-tick! civic coupe ej6 1.6 sohc-tick! CRX 16V 1.6 dohc-tick! MB6 VTI Civic 1.8 DOHC-tick! EK4 Vti-tick! EJ9 Civic-current project!
User avatar
mradz
CB-Uk User
Posts: 364
Joined: Sat Nov 22, 2008 6:31 pm
Location: Northants
Contact:

Re: Corsa V6 project

Post by mradz »

danthemann wrote:that dont seem alot for a 2.5l v6 :?
standard V6 power is between 160 - 180bhp ish, depending on which model vec you have. Most V6 engines come out up on power though. 189 bhp is fairly good for what is essentially a standard V6 engine. :)
paulzblack16v wrote:hi,did your v6 calipers go str8 on or did you have to change the hub carriers too, thanks, paul
V6 calipers will go straight on your car however you will need the discs re-drilled for 4-stud. you can buy them ready drilled from LMF amongst others. Was gonna have a look, but their website is down. :)
User avatar
mradz
CB-Uk User
Posts: 364
Joined: Sat Nov 22, 2008 6:31 pm
Location: Northants
Contact:

Update

Post by mradz »

Last few bits to get the Log upto date.

Depo smoked Headlights
Image

Smoked side repeaters
Image

Painted Calipers
Image

Made a start on install (this is what i made for my previous Corsa GSi) looks a mess but only chucked in ready to begin when time permits
Image

also fitted a pioneer headunit i had lying around.
User avatar
Mike_Parr
CB-Uk User
Posts: 1049
Joined: Tue Feb 24, 2009 6:10 pm
Location: Birmingham, UK

Re: Corsa V6 project

Post by Mike_Parr »

Looking nice, I like to painted calipers and those smoked headlights are to die for :lol:
Harkus Wrote: Lol I was actually racing a ford focus going through the tunnels making a noise was 5th missed 4th hit 2nd...at 70mph...driving like lad shifting like a woman LOL :lol:
User avatar
corsaboi1992
CB-Uk User
Posts: 1177
Joined: Tue Oct 14, 2008 8:58 pm
Location: tiptree

Re: Corsa V6 project

Post by corsaboi1992 »

:shock: :shock: tha s 1 sweet BIG engine there m8 i like i like alot :D :drool: :dance:
join our (matty101) site (just made) http://simply-vauxhall.forumotion.com
Neal
CB-Uk Newbie
Posts: 36
Joined: Sun Feb 22, 2009 10:20 am
Location: Jedburgh, Borders

Re: Corsa V6 project

Post by Neal »

I think I have just wet myself 189 bhp in a car that weighs less than a shoebox and looks pretty standard on the outside!!!
All I can say is...............GO FIND THEM SAXOS :D :D 8)
That is amazing
Creating a showcar out of a Corsa Merit
User avatar
danthemann
CB-Uk User
Posts: 3469
Joined: Sat Jan 10, 2009 3:42 am
Location: Reading/Basingstoke area

Re: Corsa V6 project

Post by danthemann »

yeh that is good for standard-but u get what i mean about how it doesnt sound alot? i know it is alot for the car :)

and yeh thats a plan about finding saxos..or some flash mateys in beemers :)
corsa b-tick! civic ej9 1.4 sohc-tick! civic coupe ej6 1.6 sohc-tick! CRX 16V 1.6 dohc-tick! MB6 VTI Civic 1.8 DOHC-tick! EK4 Vti-tick! EJ9 Civic-current project!
Post Reply