bonnet l.e.d's

[danthemann]

the bonnet i got of mobiius has led's fitted in the washer jets..just wondering if anyone got any tips on wiring them in properly??
iv decided i want them on the same switch as my interior footwell led's..so would u just need some kind of connector to join them onto the existing wire? sorry im poo at electrical stuff lol

[jar_jar89]

u could just solder em or use gaffa tape as im sure u will any way

[sam_sport]

yehhh man just use a scotch clip from halfords a couple of quid!

[danthemann]

i dont even kno what wire i gotta atach em to lol.think il just get someone to do it for me coz im useless wiv wiring.

[jar_jar89]

lol...probs from the same fuse that the footwell neons attatched to? or from the neon on/off switch?

[roperstun]

cut the cable goin to the neons after the switch and then put both ends and the cable ends from the led washer jets into 1 connecter block

[danthemann]

could anyone find a pic of what connector i need to use?

[jar_jar89]

http://www.vw-resource.com/images/electrical_block2.jpg

u get em in rows like this but can just cut off how many u need to use. they dirt cheap, like a £1 for a block of 10 of em. although soldering is a better option tbh.

[roperstun]

yea but id he dnt got a solder iron or cant solder go for the connector block but put sum slack on the wires so you can put it sumwere were no1 will see

[Octane2097]

mine had some on wen i bought it, they wired em to the sidelights that way they only come on when the lights are on,
these ones wer just taped with insulating tape, which is why apart from them looking tacky, i took them off

[danthemann]

yeh but there not legal r they? so no good if there on all the time.or am i rong?

[danthemann]

http://www.vw-resource.com/images/electrical_block2.jpg

u get em in rows like this but can just cut off how many u need to use. they dirt cheap, like a £1 for a block of 10 of em. although soldering is a better option tbh.

ok..so once i get these..where do all the wires go? lol..coz basically im gonna have 4 wires(2 black and 2 red) from the bonnet led's,then the wire coming from the switch to the footwell led's...so do i just cut the wire coming out from the switch..then what?

[roperstun]

http://www.vw-resource.com/images/electrical_block2.jpg

u get em in rows like this but can just cut off how many u need to use. they dirt cheap, like a £1 for a block of 10 of em. although soldering is a better option tbh.

ok..so once i get these..where do all the wires go? lol..coz basically im gonna have 4 wires(2 black and 2 red) from the bonnet led's,then the wire coming from the switch to the footwell led's...so do i just cut the wire coming out from the switch..then what?

yea jst cut the wire after the switch so between switch and neons and then get the ends of the washer led wires and put both the red wires in one end obv strip to cable and out the copper and then both black in the other side obv strip back again. make sure there is no copper showing or sticking out from the connector block

[danthemann]

yeh but what about the wire from the existing footwell led's?im confused big time lol

[roperstun]

if you could get pics of it mate ill edit onto in paint or sumit how i mean it be easier then tryin to explain