bonnet windscreen washers

[kie-1200sxi-shed]

ow do you remove them ? i cnt seem to get to them as the bonnet support skeleton/or whatever its caled seems to cover them ?

[MattyB]

are they normal one's or led ones?

[haydn1987]

If they are like the one on the boot you should be able to see a notch at the base that you can stick a very small screw driver in this depresses the clip and you can pull them out. use something plastic instead of a screwdriver so you don't accidentaly scratch you paint.

[kie-1200sxi-shed]

they are normal . so do i remove it from the top or beneath ?

[MattyB]

I can't be certain has i changed mine years ago but from underneath you should see a small hole (level with one of the washer jets, and under the other there should be a small oblong cut out. 1st have a look there to see if they have a nut on. If they have use a socket to undo them. From what i remember tho i thought they were push/slide forward/back off one's.