big brake help

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

Post Reply
valvercam
CB-Uk Newbie
Posts: 4
Joined: Wed Jul 08, 2009 6:56 pm

big brake help

Post by valvercam »

hi there got a corsa 1.4 sport been converted to a redtop, bought it as an unfinished project, i got sum v6 calipars and 288 ebc brakes, its all beld etc but when the car is running the pedal almost goes to th floor but when the car is off it seems fine, some corsa guru must have had this problem, any idea thanks
User avatar
roperstun
CB-Uk User
Posts: 1455
Joined: Mon Feb 16, 2009 10:18 pm
Location: newport shropshire

Re: big brake help

Post by roperstun »

you could have air in the brake lines?
[size=150][color=#4080BF] PVS next year?

i think so :) [/color][/size]
Jimi137
CB-Uk User
Posts: 741
Joined: Tue Feb 17, 2009 2:04 pm
Location: Stafford

Re: big brake help

Post by Jimi137 »

Yeh it sounds like they might need bleeding m8
valvercam
CB-Uk Newbie
Posts: 4
Joined: Wed Jul 08, 2009 6:56 pm

Re: big brake help

Post by valvercam »

have bleed them and bleed them, even changed the rear slave cylinders inside the drums, has any1 on here put big brakes on a corsa without swapping the master cylinder and they have been fine ??
paterson_uk
CB-Uk Newbie
Posts: 33
Joined: Sun Jul 20, 2008 9:58 am
Location: kent

Re: big brake help

Post by paterson_uk »

done the same conversion on mine had to buy a new master cylinder only a standard one.. as the bigger calipres require more fluid to fill them the first time i pumped the brakes it lifted the seals out the seats in the master cylinder were they wer old and weakend the cheapest place i found for a new one was eurocarparts not to sure if there a country wide shop managed to get one for £60 brand new (trade price)
valvercam
CB-Uk Newbie
Posts: 4
Joined: Wed Jul 08, 2009 6:56 pm

Re: big brake help

Post by valvercam »

my mate just sd the exact same thing, cheers for the input m8
Post Reply