when im driving along i can hear me left hand side wheel/alloy/something rubbing i think its the caliper?
when i got it up on the jack the wheel wold rock slightly but the nuts are on tight :S
helpp please!!!!
ty
HELP !
Moderator: Octane2097
-
- CB-Uk User
- Posts: 50
- Joined: Tue Jan 20, 2009 11:52 pm
- Location: harlow
Re: HELP !
it sounds like you need new wheel bearing mate i bet it sounds like a wering sound is it worse when your drivng round a corner
steve
steve
- prawny12009
- CB-Uk User
- Posts: 87
- Joined: Tue Jun 16, 2009 1:18 pm
Re: HELP !
check that your brake pads are not down to the metal,
Are you getting a scrapping/grinding sound when braking? or as above is it sort of a whine/hum when turning etc?
You really need the wheel off the ground to check for wheel bearing play whilst your there you can chyeck the pad too if you like, you need to grab the wheel at 12 and 6 o'clock and try to rock the wheel, if you try from 3 and 9 o'clock you might pick up steering arm/rack play or lower arm movement instead of wheel bearing movement, thats why you check at 12 and 6 (remember though that you can pick up bottom ball joint play it 12 and 6 too).
Are you getting a scrapping/grinding sound when braking? or as above is it sort of a whine/hum when turning etc?
You really need the wheel off the ground to check for wheel bearing play whilst your there you can chyeck the pad too if you like, you need to grab the wheel at 12 and 6 o'clock and try to rock the wheel, if you try from 3 and 9 o'clock you might pick up steering arm/rack play or lower arm movement instead of wheel bearing movement, thats why you check at 12 and 6 (remember though that you can pick up bottom ball joint play it 12 and 6 too).
-
- CB-Uk Newbie
- Posts: 48
- Joined: Tue Mar 31, 2009 9:21 pm
- Location: selby, north yorkshire
Re: HELP !
YES i get a rubbing grinding noise, ive noticed that little shards of metal are appearing aswell!
brake pad i pressume?
how would i take it off to check aswell?
and i dont get any real play on my wheel (12-6)
ty!
brake pad i pressume?
how would i take it off to check aswell?
and i dont get any real play on my wheel (12-6)
ty!
- prawny12009
- CB-Uk User
- Posts: 87
- Joined: Tue Jun 16, 2009 1:18 pm
Re: HELP !
to check your pads and disc you will find its easier to see if you take the wheek off, the pads should be a minimum of a few mm thick