Exaust help

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

Post Reply
-Woody-
CB-Uk Newbie
Posts: 3
Joined: Sat Jul 11, 2009 8:00 pm

Exaust help

Post by -Woody- »

Alryte PPL Im New to the forum Im 17 - 18 this month i have a corsa merit 1.2 8v

i've just bought a performance back box but it needs fabricating as i fited it to my exaust but its to short so i was just wondering does anybody no where i cud get this fabricated and fitted as soon as possible,within the manchester area any information is appreciated

Thanks Andrew.
User avatar
Saralo
CB-Uk User
Posts: 1142
Joined: Sun Dec 21, 2008 9:07 pm
Location: From Leeds! Living in Wakey!!

Re: Exaust help

Post by Saralo »

Just get it done at a garage

N welcome :D
[size=150][color=#FF80FF]CB-UK GIRLY GIRL![/color][/size]
I do like Barbie me!
User avatar
roperstun
CB-Uk User
Posts: 1455
Joined: Mon Feb 16, 2009 10:18 pm
Location: newport shropshire

Re: Exaust help

Post by roperstun »

what do you mean its to short?
[size=150][color=#4080BF] PVS next year?

i think so :) [/color][/size]
-Woody-
CB-Uk Newbie
Posts: 3
Joined: Sat Jul 11, 2009 8:00 pm

Re: Exaust help

Post by -Woody- »

Basically its a small back box, u get a free fitting kit wich is a bit of pipe tht fits on the exaust then onto the backbox but the back box only just reaches the end of the petrol tank nt the rear of the car, if u get me. it just needs a bit of pipe tht fits over the exaust then into the back box . i took it to national tyres today and they cudnt do it :o
User avatar
prawny12009
CB-Uk User
Posts: 87
Joined: Tue Jun 16, 2009 1:18 pm

Re: Exhaust help

Post by prawny12009 »

Can't you just cut the excess pipe off your old back box? and get it welded on to make up the difference or am i missing something here :meh:

Be sure to get your self an injector head from a 1.4 spi to stop you running too lean and killing your sparkplugs (or even melting you pistons), oh and im probably gonna be slated for this but don't fit one of those stupid k&n style cone filters you will ruin the drivability of a 1.2 8v, if your gonna get anything buy a nice panel filter for your stock air box (which can be modified the guides are all over this site.
User avatar
roperstun
CB-Uk User
Posts: 1455
Joined: Mon Feb 16, 2009 10:18 pm
Location: newport shropshire

Re: Exaust help

Post by roperstun »

if it only reaches the petrol tank then you have taken off the origional exhaust in the wrong place. you only need to remove the origional back box not most of the system
[size=150][color=#4080BF] PVS next year?

i think so :) [/color][/size]
User avatar
Saralo
CB-Uk User
Posts: 1142
Joined: Sun Dec 21, 2008 9:07 pm
Location: From Leeds! Living in Wakey!!

Re: Exhaust help

Post by Saralo »

prawny12009 wrote:Can't you just cut the excess pipe off your old back box? and get it welded on to make up the difference or am i missing something here :meh:

Be sure to get your self an injector head from a 1.4 spi to stop you running too lean and killing your sparkplugs (or even melting you pistons), oh and im probably gonna be slated for this but don't fit one of those stupid k&n style cone filters you will ruin the drivability of a 1.2 8v, if your gonna get anything buy a nice panel filter for your stock air box (which can be modified the guides are all over this site.

Why would you get slated? :?
[size=150][color=#FF80FF]CB-UK GIRLY GIRL![/color][/size]
I do like Barbie me!
User avatar
prawny12009
CB-Uk User
Posts: 87
Joined: Tue Jun 16, 2009 1:18 pm

Re: Exaust help

Post by prawny12009 »

It's just a lot of people think a cone filter is the be all and end all in gaining power, when most of the time they dont (unless set up right).
aimable455
CB-Uk User
Posts: 50
Joined: Tue Jan 20, 2009 11:52 pm
Location: harlow

Re: Exaust help

Post by aimable455 »

agreed i had k&n andit killed my mass air flow metre because it just sucked up hot air, that was with a cold air feed as well, its a killer when stuck in traffic
Jimi137
CB-Uk User
Posts: 741
Joined: Tue Feb 17, 2009 2:04 pm
Location: Stafford

Re: Exaust help

Post by Jimi137 »

I know what the TC is on about - i got a backbox off a m8 from a 106 which had basically just been hacksawed off sbout 2 inches after the box so obv it wudnt connect to anything on a corsa. I got mine done and my local exhaust specialists - they do custom exhaust systems for road and race cars so try looking in the yellow pages for one of those. Ordinary garages like HiQ and kwickfit wont be able to do this kind of thing
Post Reply