My Red 1.0 12V Corsa Breeze Project

[danthemann]

bet that sounds well nice wen u boot it

[Tom-Corsa]

Ye mannn!! found out how to get it poppin like mad now aswell! just get rev to 3 when im drivin then let it die down while tappin the pedal...just pops like poo haha

[Tom-Corsa]

My photoshop edit of what i want it to look like!

[Dukasaki]

Did the Cherry bomb, just fit onto the original piping, cos i know 1.0's are meant to have smaller pipes or something? Cheers.

[Tom-Corsa]

Na i had to go to a exhaust specialist to get it welded onto a new pipe

[DansCorsaSXi]

Hi Tom,just wondering,you know how you`ve taken your bump strips of,could you tell us how to do it and what i`ll need to get all glue to come of? I didnt take them off cos me dad said there would be holes where its fitted on to the car.I reckon im going to take them of cos it looks wicked without them on. Cheers pal

[danthemann]

theres no holes mate,just glue.and theres loads of ways to get the glue off-it seems everyone has found different ways..i personally used hot water and t-cut with a credit card...but the main thing is lots of elbow grease and time lol

[DansCorsaSXi]

Ahhh! Nice one pal,thx alot Dan,really appreciate it,i was never to sure what was under it,im probs going to do it soon and i cant wait now lol,what will i need to get the strip of,just pull it of or some kind of string to gradually get it of? Thx so much for this info dude

[danthemann]

just pull it off lol..or heat it up with a heatgun or hairdryer and slide some fishing line along behind it-this is really only needed on the badges rather than the strips tho mate.

[DansCorsaSXi]

Ok cheers pal,thx again,having it lowered and calipers painted then ill consider doing it Whats next on your project dude?

[roperstun]

if u heat the strips up and use fishing wire or an old car url get most the glue off with the strips

[Tom-Corsa]

Orite mate, sorry for late reply! I used tar and glue remover with a damp cloth then once the solution settled in the glue i used an old card to get it off with... takes alot of elbow grease and time lol...but finishing results are good!... and if u get a black outline from where the paint has come off just t-cut it and its fine

[Tom-Corsa]

Got bored yes2day so decided to go round my mates and do a little work on the red b lol... de-wipered the boot and coverd the hole with a plug and abit of super glue lol! and since the rocker cover was rusty my mate decided to spray it black! the plastic cover needs sanding down and resprayin tho as the paint has bubbled. Ripped the air box out aswell and cleaned around the engine bay... all thats needed is to drop a redtop in

[Tom-Corsa]

Uno my pea sized engine is a beast lmao! its shockin that people can actualy get 100bhp out of 1.0s!!

[SparcoSt3]

how do u get 100 bhp lol