Help and advice section for technical questions on your Corsa.
Moderator: Octane2097
plexo
CB-Uk User
Posts: 88Joined: Tue Nov 17, 2009 7:29 pm
Post
by plexo Wed Dec 09, 2009 2:38 am
get a heavy man and get him to batter the steerin wheel with it unbolted, worked for mine!
pity i was given the wrong boss kit...
danthemann
CB-Uk User
Posts: 3469Joined: Sat Jan 10, 2009 3:42 amLocation: Reading/Basingstoke area
Post
by danthemann Sun Dec 13, 2009 1:51 pm
tried doing this but it didnt work,all it done was mash the nut lol
corsa b-tick! civic ej9 1.4 sohc-tick! civic coupe ej6 1.6 sohc-tick! CRX 16V 1.6 dohc-tick! MB6 VTI Civic 1.8 DOHC-tick! EK4 Vti-tick! EJ9 Civic-current project!
LesterPiglet1
CB-Uk User
Posts: 398Joined: Mon Jun 09, 2008 9:11 pmLocation: Bangor, Norn Iron
Post
by LesterPiglet1 Sun Dec 13, 2009 2:40 pm
The nut needs to be screwed on so the top of it is flush with the top of the shaft.
breathecosse
CB-Uk User
Posts: 82Joined: Sun May 10, 2009 11:08 pm
Post
by breathecosse Sun Dec 13, 2009 4:14 pm
Did you have the nut sitting flesh with the top of the shaft?
danthemann
CB-Uk User
Posts: 3469Joined: Sat Jan 10, 2009 3:42 amLocation: Reading/Basingstoke area
Post
by danthemann Mon Dec 14, 2009 1:01 am
yeh i had the nut flush,probz not workin coz of the hammer im using lol...and where u live mate?
corsa b-tick! civic ej9 1.4 sohc-tick! civic coupe ej6 1.6 sohc-tick! CRX 16V 1.6 dohc-tick! MB6 VTI Civic 1.8 DOHC-tick! EK4 Vti-tick! EJ9 Civic-current project!
PRICER
CB-Uk User
Posts: 3510Joined: Sun May 10, 2009 9:21 pmLocation: ludlow shropshire
Post
by PRICER Tue Dec 15, 2009 7:29 pm
or just put your feet on the dash and yank like f**k thats what i did to mine.
danthemann
CB-Uk User
Posts: 3469Joined: Sat Jan 10, 2009 3:42 amLocation: Reading/Basingstoke area
Post
by danthemann Wed Dec 16, 2009 8:18 pm
tried that with no luck lol
corsa b-tick! civic ej9 1.4 sohc-tick! civic coupe ej6 1.6 sohc-tick! CRX 16V 1.6 dohc-tick! MB6 VTI Civic 1.8 DOHC-tick! EK4 Vti-tick! EJ9 Civic-current project!
oli321
CB-Uk Newbie
Posts: 2Joined: Fri Dec 18, 2009 4:59 pm
Post
by oli321 Fri Dec 18, 2009 5:10 pm
pull the steering wheel side to side and itl come off!
danthemann
CB-Uk User
Posts: 3469Joined: Sat Jan 10, 2009 3:42 amLocation: Reading/Basingstoke area
Post
by danthemann Sat Dec 19, 2009 12:49 am
not in my case lol
corsa b-tick! civic ej9 1.4 sohc-tick! civic coupe ej6 1.6 sohc-tick! CRX 16V 1.6 dohc-tick! MB6 VTI Civic 1.8 DOHC-tick! EK4 Vti-tick! EJ9 Civic-current project!
Jimi137
CB-Uk User
Posts: 741Joined: Tue Feb 17, 2009 2:04 pmLocation: Stafford
Post
by Jimi137 Sat Dec 19, 2009 4:09 pm
I think tbh it might be time to invest in a 'puller' off fleabay m8 - i know they are 15 quid but that aint that much. plus you can always sell it again after uve finished with it as well
lol
danthemann
CB-Uk User
Posts: 3469Joined: Sat Jan 10, 2009 3:42 amLocation: Reading/Basingstoke area
Post
by danthemann Sun Dec 20, 2009 12:12 am
gotta take my car to a mate to remove a rounded bolt on seat,so hes gonna do it,hes done it loads of times..and was one of the first people to fit the 1.8 lump in a corsa b lol
corsa b-tick! civic ej9 1.4 sohc-tick! civic coupe ej6 1.6 sohc-tick! CRX 16V 1.6 dohc-tick! MB6 VTI Civic 1.8 DOHC-tick! EK4 Vti-tick! EJ9 Civic-current project!
rawgrafix
CB-Uk User
Posts: 121Joined: Thu Nov 26, 2009 12:25 am
Post
by rawgrafix Sat Jan 09, 2010 10:18 pm
I'm attempting removal of the steering wheel tomorrow and from the thread so far it seems like a complicated procedure. Is it not just a case of removing the horn, undo a big nut then whack the steering wheel from behind?
RAW Grafix - Custom Vinyl Artwork
danthemann
CB-Uk User
Posts: 3469Joined: Sat Jan 10, 2009 3:42 amLocation: Reading/Basingstoke area
Post
by danthemann Sat Jan 09, 2010 11:21 pm
22mm
corsa b-tick! civic ej9 1.4 sohc-tick! civic coupe ej6 1.6 sohc-tick! CRX 16V 1.6 dohc-tick! MB6 VTI Civic 1.8 DOHC-tick! EK4 Vti-tick! EJ9 Civic-current project!
lol