corsa gsi project
- corsa1987
- CB-Uk User
- Posts: 133
- Joined: Sat Mar 28, 2009 4:56 pm
- Location: surrey
corsa gsi project
the car was a 1.2 ls but recently iv fitted a 1.4 16valve sri engine and gsi bodykit plus other things.
this is what my car used to look like
my car and the sri donor car
the sri donor
my car now
so far the list of mods is :
1.4 16 valve engine
Carbon induction kit (different one then that is pictured)
gsi down pipe and cat
sportex race tube and sportex 3inch rolled tip backbox
sri suspension
sri brakes
gsi body kit
debadged back,sides and bump strips removed
pressed metal number plates
tinted side repeaters
tinted rear lghts
vauxhall fan blade alloys sprayed black
full sri interia (front, rear seats, door cards, all black trim boot, doors etc)
momo steering wheel
momo gear knob
sprayed sri clocks (flame red)
red interia footwell neons
jvc head unit and 6x9's
kenwood amp
kicker sub
thats the list for now just need afew more things doing to it b4 im happy.
got a set of 60mm coil over suspension to go on but need lower profile tyres first
need to get nsf wheel arch and a l piece
tinted windows
4 branch and de cat
depo headlights
cav slabs
and sometime this year a c20xe conversion
so let me no what u think of what i have done so far and any ideas 4 the car would be great lol
cheers matt.
this is what my car used to look like
my car and the sri donor car
the sri donor
my car now
so far the list of mods is :
1.4 16 valve engine
Carbon induction kit (different one then that is pictured)
gsi down pipe and cat
sportex race tube and sportex 3inch rolled tip backbox
sri suspension
sri brakes
gsi body kit
debadged back,sides and bump strips removed
pressed metal number plates
tinted side repeaters
tinted rear lghts
vauxhall fan blade alloys sprayed black
full sri interia (front, rear seats, door cards, all black trim boot, doors etc)
momo steering wheel
momo gear knob
sprayed sri clocks (flame red)
red interia footwell neons
jvc head unit and 6x9's
kenwood amp
kicker sub
thats the list for now just need afew more things doing to it b4 im happy.
got a set of 60mm coil over suspension to go on but need lower profile tyres first
need to get nsf wheel arch and a l piece
tinted windows
4 branch and de cat
depo headlights
cav slabs
and sometime this year a c20xe conversion
so let me no what u think of what i have done so far and any ideas 4 the car would be great lol
cheers matt.
- matty101
- Senior Moderator
- Posts: 2961
- Joined: Thu May 28, 2009 8:54 pm
- Location: Hexham
Re: corsa gsi project
to the site mate, nice car u got there. looks really smart. was there much difference between the 1.2 and 1.4? and didnt u just go straight for the c20xe?
nice car though mate get sum more pics up.
nice car though mate get sum more pics up.
OFFICAL DVLA DATA:
1414 - corsa gsi's on the road in 2008.
735 - corsa gsi's currently on the road and 436 SORN
Basicly you would have to be a right tw*t to break one for parts
Thanks to everyone for an awsome weekend at pvs!
1414 - corsa gsi's on the road in 2008.
735 - corsa gsi's currently on the road and 436 SORN
Basicly you would have to be a right tw*t to break one for parts
Thanks to everyone for an awsome weekend at pvs!
- bluecorsab
- CB-Uk User
- Posts: 1075
- Joined: Tue Aug 25, 2009 7:56 pm
- Location: Sleaford, Lincolnshire
Re: corsa gsi project
hello & , i would of fitted a x18xe1 as it bassed on the same block as a x14xe so would fit in the same as the x14xe but would give you loads more power for your money, if in the future you wanna swap to a x18xe1 then it will be simple
RED Corsa GSi Owner - Thats one GSi saved from the scrapheap and the pikeys who break them or ruin them with tacky mods
- corsa1987
- CB-Uk User
- Posts: 133
- Joined: Sat Mar 28, 2009 4:56 pm
- Location: surrey
Re: corsa gsi project
matty101 wrote: to the site mate, nice car u got there. looks really smart. was there much difference between the 1.2 and 1.4? and didnt u just go straight for the c20xe?
nice car though mate get sum more pics up.
cheers and i went straight to the 1.4 cos i had a honda civic and my mate had the sri so we swapped cars and he gave money on top and the convertion was pretty simple i just dropped the 1.2 engine and box with the hole front suspension and removed the 1.2 wiring loom for the engine from the transfer box then put the new wiring in and slid the 1.4 engine box suspension under mine and just lowered the car on to it. but iv seen a few c20xe engines on ebay so gonna try and get one lol
- corsa1987
- CB-Uk User
- Posts: 133
- Joined: Sat Mar 28, 2009 4:56 pm
- Location: surrey
Re: corsa gsi project
cheers for the advice mate and dependin on money im tryin to get a c20xe engine but if it works out to exspensive may consider the x18 so is the loom the same on the engine or would i need the loom for the engine and is the connector plug the same as on the 1.4 cos mine has a big blue plug that sits near the inletbluecorsab wrote:hello & , i would of fitted a x18xe1 as it bassed on the same block as a x14xe so would fit in the same as the x14xe but would give you loads more power for your money, if in the future you wanna swap to a x18xe1 then it will be simple
- corsa1987
- CB-Uk User
- Posts: 133
- Joined: Sat Mar 28, 2009 4:56 pm
- Location: surrey
Re: corsa gsi project
hopefully to mo i will be able to fit my coilovers and side skirts so if it gets done will get some more pics up
- corsa1987
- CB-Uk User
- Posts: 133
- Joined: Sat Mar 28, 2009 4:56 pm
- Location: surrey
Re: corsa gsi project
the car is finally lowered dont like speed bumps tho lol. will try and get pics up tomo oh and had to fit 14 inch steel wheels cos my fan blades rub so if anyone is interested they are £100 or a swap for a set of 14inch corsa sri wheels or gsi wheels
- roperstun
- CB-Uk User
- Posts: 1455
- Joined: Mon Feb 16, 2009 10:18 pm
- Location: newport shropshire
Re: corsa gsi project
ive gt a set of 14" gloss black cav td fanblades for sale for £50
[size=150][color=#4080BF] PVS next year?
i think so :) [/color][/size]
i think so :) [/color][/size]
- corsa1987
- CB-Uk User
- Posts: 133
- Joined: Sat Mar 28, 2009 4:56 pm
- Location: surrey
Re: corsa gsi project
have u got any pics and what is the tyre size cheers.roperstun wrote:ive gt a set of 14" gloss black cav td fanblades for sale for £50
- roperstun
- CB-Uk User
- Posts: 1455
- Joined: Mon Feb 16, 2009 10:18 pm
- Location: newport shropshire
Re: corsa gsi project
pics in my project log and 165/70/14 iic or 175/70/14
[size=150][color=#4080BF] PVS next year?
i think so :) [/color][/size]
i think so :) [/color][/size]
- corsa1987
- CB-Uk User
- Posts: 133
- Joined: Sat Mar 28, 2009 4:56 pm
- Location: surrey
Re: corsa gsi project
are the pics in the project log for the blue or red mateyroperstun wrote:pics in my project log and 165/70/14 iic or 175/70/14
- matty101
- Senior Moderator
- Posts: 2961
- Joined: Thu May 28, 2009 8:54 pm
- Location: Hexham
Re: corsa gsi project
???????/corsa1987 wrote:are the pics in the project log for the blue or red mateyroperstun wrote:pics in my project log and 165/70/14 iic or 175/70/14
heres a link to his log if thats wot u mean
http://forums.corsa-b.co.uk/viewtopic.p ... &start=150
OFFICAL DVLA DATA:
1414 - corsa gsi's on the road in 2008.
735 - corsa gsi's currently on the road and 436 SORN
Basicly you would have to be a right tw*t to break one for parts
Thanks to everyone for an awsome weekend at pvs!
1414 - corsa gsi's on the road in 2008.
735 - corsa gsi's currently on the road and 436 SORN
Basicly you would have to be a right tw*t to break one for parts
Thanks to everyone for an awsome weekend at pvs!
- corsa1987
- CB-Uk User
- Posts: 133
- Joined: Sat Mar 28, 2009 4:56 pm
- Location: surrey
Re: corsa gsi project
i will have a think about them wheels mate cos i would lik a set of sri wheels or gsi but thanks for the offer and if i cant get hold of any wheels i will contact u about them wheels.matty101 wrote:???????/corsa1987 wrote:are the pics in the project log for the blue or red mateyroperstun wrote:pics in my project log and 165/70/14 iic or 175/70/14
heres a link to his log if thats wot u mean
http://forums.corsa-b.co.uk/viewtopic.p ... &start=150
cheers matt
- corsa1987
- CB-Uk User
- Posts: 133
- Joined: Sat Mar 28, 2009 4:56 pm
- Location: surrey
- corsa1987
- CB-Uk User
- Posts: 133
- Joined: Sat Mar 28, 2009 4:56 pm
- Location: surrey
Re: corsa gsi project
got a new set of alloys other day. 4 corsa gsi wheels with centre caps and good tyres for £30 bargain but dont no if i should spray them gloss black or just give them a fresh coat of standered silver