auxiliary belt squeaking
Moderator: Octane2097
-
- CB-Uk User
- Posts: 143
- Joined: Thu Jan 01, 2009 6:15 pm
- Location: Kent
auxiliary belt squeaking
i noticed this morning the auxiliary belt seems to be squeaking. firstly. anyone know why its doing it? its on a 1l corsa.
is it the waterpump? or maybe one of the bearings in the pullies? the belt seems fine, not loose etc.
any ideas?
is it safe to drive with it doing that, till i can get it fixed?
is it the waterpump? or maybe one of the bearings in the pullies? the belt seems fine, not loose etc.
any ideas?
is it safe to drive with it doing that, till i can get it fixed?
[b][color=#0000BF]CORSA ENVOY PROJECT LOG[/color][/b] http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=10500
- LesterPiglet1
- CB-Uk User
- Posts: 398
- Joined: Mon Jun 09, 2008 9:11 pm
- Location: Bangor, Norn Iron
Re: auxiliary belt squeaking
If it is the belt it is safe to drive, if it is something else I would replace it asp. Spray some wd40 on the belt and see if the noise stops.
- dandadan
- CB-Uk User
- Posts: 294
- Joined: Sat Nov 21, 2009 12:56 am
- Location: Lancashire
Re: auxiliary belt squeaking
if i was you i wouldnt spray wd40 on it. check the belt for wear and make sure it is sat flush with the pulley and not sat below. if its sat below it needs replacing. and this will stop the squeeking.
dan
dan
Drive it like you stole it
- duncanpound
- CB-Uk User
- Posts: 449
- Joined: Wed Dec 30, 2009 5:10 pm
- Location: Shropshire/Herefordshire/Worcestershire Borders
Re: auxiliary belt squeaking
check for cracks in the groove of the belt too
[size=150][b][color=#008000]Corsa B W Reg[/color][/b][/size]
[color=#008000][u][b]check out my project log[/b][/u][/color] http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=14330
[color=#008000][u][b]check out my project log[/b][/u][/color] http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=14330
- LesterPiglet1
- CB-Uk User
- Posts: 398
- Joined: Mon Jun 09, 2008 9:11 pm
- Location: Bangor, Norn Iron
Re: auxiliary belt squeaking
dandadan wrote:if i was you i wouldnt spray wd40 on it.
dan
Reason being?
- dandadan
- CB-Uk User
- Posts: 294
- Joined: Sat Nov 21, 2009 12:56 am
- Location: Lancashire
Re: auxiliary belt squeaking
its not the best idea spraying penetrating fluid on to a belt or pulley when friction is involved as the wd40 will stop the friction therefore it will stop the squeek but can also stop the belt old or new getting proper friction/grip again
Drive it like you stole it
- LesterPiglet1
- CB-Uk User
- Posts: 398
- Joined: Mon Jun 09, 2008 9:11 pm
- Location: Bangor, Norn Iron
Re: auxiliary belt squeaking
WD40 is not a penetrating fluid, it is a moisture dispersant. The whole idea of spraying it on the belt was to see if it stopped the squeak, this then would either point to the belt or another component.
- dandadan
- CB-Uk User
- Posts: 294
- Joined: Sat Nov 21, 2009 12:56 am
- Location: Lancashire
Re: auxiliary belt squeaking
why do people spray it onto seized nuts and bolts then if its not a penetrating fluid? i still dont recommend spraying it on a belt, it acts like your oil in your engine leaving a film between the pulley and belt, i know it will stop the squeek but i still dont recommend it.
checking the belt isnt sitting below the pulley would indicate the belt making the squeek and also taking it off and checking how worn it is, might take a few minutes longer but is much better in the long run
checking the belt isnt sitting below the pulley would indicate the belt making the squeek and also taking it off and checking how worn it is, might take a few minutes longer but is much better in the long run
Last edited by dandadan on Thu Feb 11, 2010 9:42 pm, edited 1 time in total.
Drive it like you stole it
- LesterPiglet1
- CB-Uk User
- Posts: 398
- Joined: Mon Jun 09, 2008 9:11 pm
- Location: Bangor, Norn Iron
Re: auxiliary belt squeaking
WD = water dispersant. 40 = 40th attempt. It will wear off the belt fairly quickly.
- dandadan
- CB-Uk User
- Posts: 294
- Joined: Sat Nov 21, 2009 12:56 am
- Location: Lancashire
Re: auxiliary belt squeaking
would brake cleaner not be better if you was to do it? i dont want to argue or anything its just i have been learnt not to do it.
Drive it like you stole it
- duncanpound
- CB-Uk User
- Posts: 449
- Joined: Wed Dec 30, 2009 5:10 pm
- Location: Shropshire/Herefordshire/Worcestershire Borders
Re: auxiliary belt squeaking
anyone ever heard of mutts nuts spray
[size=150][b][color=#008000]Corsa B W Reg[/color][/b][/size]
[color=#008000][u][b]check out my project log[/b][/u][/color] http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=14330
[color=#008000][u][b]check out my project log[/b][/u][/color] http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=14330
- LesterPiglet1
- CB-Uk User
- Posts: 398
- Joined: Mon Jun 09, 2008 9:11 pm
- Location: Bangor, Norn Iron
Re: auxiliary belt squeaking
You won't know until you try these things yourself. I think brake cleaner evaporates too quickly and there are solvents in it which will damage the belt.dandadan wrote:would brake cleaner not be better if you was to do it? i dont want to argue or anything its just i have been learnt not to do it.
- LesterPiglet1
- CB-Uk User
- Posts: 398
- Joined: Mon Jun 09, 2008 9:11 pm
- Location: Bangor, Norn Iron
Re: auxiliary belt squeaking
Heard the name thats all.duncanpound wrote:anyone ever heard of mutts nuts spray
http://www.engineeringtalk.com/news/mhu/mhu100.html
Last edited by LesterPiglet1 on Thu Feb 11, 2010 9:49 pm, edited 1 time in total.
- dandadan
- CB-Uk User
- Posts: 294
- Joined: Sat Nov 21, 2009 12:56 am
- Location: Lancashire
- duncanpound
- CB-Uk User
- Posts: 449
- Joined: Wed Dec 30, 2009 5:10 pm
- Location: Shropshire/Herefordshire/Worcestershire Borders
Re: auxiliary belt squeaking
any good
well its probabaly 3 or 4 times better than wd40.
we bought a box full of a company in ireland, expensive mind. but still reallly really good stuff. used it for the plastic nuts on wheel arches and worked perfect
well its probabaly 3 or 4 times better than wd40.
we bought a box full of a company in ireland, expensive mind. but still reallly really good stuff. used it for the plastic nuts on wheel arches and worked perfect
[size=150][b][color=#008000]Corsa B W Reg[/color][/b][/size]
[color=#008000][u][b]check out my project log[/b][/u][/color] http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=14330
[color=#008000][u][b]check out my project log[/b][/u][/color] http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=14330