how or whats the best way 2 fit it 2 my std corsa bumper?
sach
Fitting a rieger RS front apron
Moderator: Octane2097
-
sach
- CB-Uk User
- Posts: 757
- Joined: Wed Nov 17, 2004 3:35 pm
- Location: london
-
PaulW
- Administrator
- Posts: 1765
- Joined: Tue Oct 19, 2004 10:34 pm
- Location: Winnington/Liverpool
- Contact:
Fitting a rieger RS front apron
not 100% sure myself, but will ask around
would say bond it on with something like tigerseal & pos a few self-tapping screws for strength... then smooth it in with some fibreglass & P45 filler, sand it down & smooth it, prime it & then spray...
you\'ll need a plastic primer though as the bumper will flex & also the plastic primer bonds much better to the plastic... normal primers are for metal, so will flake off!
would say bond it on with something like tigerseal & pos a few self-tapping screws for strength... then smooth it in with some fibreglass & P45 filler, sand it down & smooth it, prime it & then spray...
you\'ll need a plastic primer though as the bumper will flex & also the plastic primer bonds much better to the plastic... normal primers are for metal, so will flake off!
All the above comments are deemed an opinion, and in most cases 
-
sach
- CB-Uk User
- Posts: 757
- Joined: Wed Nov 17, 2004 3:35 pm
- Location: london
Fitting a rieger RS front apron
ok m8 thanks for that.