Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

I wouldn't know where to start.

How do I get the loom out is it runs through the bulk head on the drivers side and the ECU is in the enter console

And the steering wheel with out blowning the air bag out to

How much posted on the clocks after them orange needle once for a while

Sent from my GT-I9100 using Tapatalk

I've removed them all ready pal make me an. Offer for them pal

£15 posted ?

Sent from my GT-I9100 using Tapatalk

Yeah that's cool pal, PayPal me I'll get them sent out Monday for you .

Mharkus1987@hotmail.co.uk

Trying to remove the loom from my car via the bulk head but it's proving difficult .

Theres connections in behind the dash so it gas to come out to take.off all the tape and plugs then.it will just pull out

Steering wheel, theres two torx screws at the back of the wheel, there hard to see, that takes the cover off, then theres a yellow connection, undo that first then the rest and it will lift out

So I need to remove the dash then yeah pal?. Better get my ars into gear and figure it out then lol. Someone is coming to look at the engine today and the loom is still in the car.

Well if you take the glove box out and the heater panel you should be able to reach everthing

I've undone the two talks and the clips and it won't come out still .

What wont come out

Sterring wheel.

I've removed the 22 mil but and air bag and it won't fine off yanked at it and it's well and truly stuck on .

Aw you need a puller to get the wheell off easy

You can pull them out with alot of brute force

Ah well.. That's put a stop to that one .

Got the wings off and one I the mirrors .

I take them off without a puller, easiest way imo is grab the wheel at 9 and3 and get your foot on the A piller and pull it on side at a time, normally works