Page 2 of 6

Re: Corsa V6 project

Posted: Sat Apr 18, 2009 11:10 pm
by mradz
iToMo x wrote:Have you got shocks on that aswell ?
If so how much and where you get them from ?
the shocks are standard, coilovers are the next thing to be getting done hopefully :lol:

Re: Corsa V6 project

Posted: Sun Apr 19, 2009 8:26 am
by Chrex
that must handle worse than paul's omega! :? V6 in the front wit 60mm springs and standard shocks...forget boat, that must be a ferry!

Re: Corsa V6 project

Posted: Sun Apr 19, 2009 10:19 am
by iToMo x
Chrex wrote:that must handle worse than paul's omega! :? V6 in the front wit 60mm springs and standard shocks...forget boat, that must be a ferry!
PMSL!!!! :lol:

Re: Corsa V6 project

Posted: Sun Apr 19, 2009 11:27 am
by roperstun
that engine looks sexual :drool:

the handling must be shocking doe

Rolling road

Posted: Sun Apr 19, 2009 6:56 pm
by mradz
Another forum i'm on organised a rolling road day, so i thought i would take the corsa along to see what it is putting out.

Image
Image

unfortunatly it didn't wanna stay in the rollers, so had to be helped a little

Image

and the results

Image


it doesn't handle that badly considering the rather poor suspension set up! Is rather bumpy though :lol: they are not actually 60mm springs at the front but the extra weight takes it down to about 60mm. It is only being used as a temp set upto until i get around to sorting coilovers and ARB's to sort out the handling properly. :)

Re: Corsa V6 project

Posted: Sun Apr 19, 2009 6:59 pm
by Mike_Parr
189 bhp :D

Re: Corsa V6 project

Posted: Sun Apr 19, 2009 6:59 pm
by iToMo x
WoW :shock:

Re: Corsa V6 project

Posted: Sun Apr 19, 2009 7:38 pm
by paulzblack16v
hi,did your v6 calipers go str8 on or did you have to change the hub carriers too, thanks, paul

Re: Corsa V6 project

Posted: Sun Apr 19, 2009 7:51 pm
by danthemann
that dont seem alot for a 2.5l v6 :?

Re: Corsa V6 project

Posted: Sun Apr 19, 2009 8:45 pm
by mradz
danthemann wrote:that dont seem alot for a 2.5l v6 :?
standard V6 power is between 160 - 180bhp ish, depending on which model vec you have. Most V6 engines come out up on power though. 189 bhp is fairly good for what is essentially a standard V6 engine. :)
paulzblack16v wrote:hi,did your v6 calipers go str8 on or did you have to change the hub carriers too, thanks, paul
V6 calipers will go straight on your car however you will need the discs re-drilled for 4-stud. you can buy them ready drilled from LMF amongst others. Was gonna have a look, but their website is down. :)

Update

Posted: Sun Apr 19, 2009 8:51 pm
by mradz
Last few bits to get the Log upto date.

Depo smoked Headlights
Image

Smoked side repeaters
Image

Painted Calipers
Image

Made a start on install (this is what i made for my previous Corsa GSi) looks a mess but only chucked in ready to begin when time permits
Image

also fitted a pioneer headunit i had lying around.

Re: Corsa V6 project

Posted: Sun Apr 19, 2009 9:42 pm
by Mike_Parr
Looking nice, I like to painted calipers and those smoked headlights are to die for :lol:

Re: Corsa V6 project

Posted: Tue Apr 21, 2009 10:24 am
by corsaboi1992
:shock: :shock: tha s 1 sweet BIG engine there m8 i like i like alot :D :drool: :dance:

Re: Corsa V6 project

Posted: Tue Apr 21, 2009 10:38 am
by Neal
I think I have just wet myself 189 bhp in a car that weighs less than a shoebox and looks pretty standard on the outside!!!
All I can say is...............GO FIND THEM SAXOS :D :D 8)
That is amazing

Re: Corsa V6 project

Posted: Tue Apr 21, 2009 1:16 pm
by danthemann
yeh that is good for standard-but u get what i mean about how it doesnt sound alot? i know it is alot for the car :)

and yeh thats a plan about finding saxos..or some flash mateys in beemers :)