Page 2 of 3
Posted: Mon Feb 12, 2007 3:22 pm
by kaz
he put the therastat in upside down so it didnt open untill off the red silly adam
Posted: Mon Feb 12, 2007 6:18 pm
by Adam-D
be f**k hard to put the stat in upside down
its part of the cover mine is a late spec with air con, the stat is part of the out cover, look above there is a pic of it, its all built in.
and to save you looking here it is again. you cant fit it upside down
Posted: Mon Feb 12, 2007 6:19 pm
by Adam-D
bit of progress today
fitted rear suspension, fitted headlights, waxoiled rear arch`s,
some pics,,
before lowering the rear, "the front has alredy been done"
old suspension off
comparing the vaux top mount to aftermarket top mount, i decided the same as last time i did my suspension to use the vaux top mount as its fatter and more substansial, ive heard aftermarket topmount knock occasionly, so to prevent this i used the vaux top mount
i wire brushed the inner arch and like the front got half a lawns worth of soil out :!
all wire brushed down
new suspension in, and waxoiled
and how it sits now
and my new headlight arrived so i fitted them up aswell
Posted: Mon Feb 12, 2007 7:13 pm
by kaz
ooooooo lookin pretty sexual their mate
Posted: Mon Feb 12, 2007 11:47 pm
by sam13
nice progress going to wax oil my arches on new project soon when just having rust problems like si at the min.
Posted: Fri Feb 16, 2007 9:08 pm
by Adam-D
sub fitted to the box
Posted: Sun Feb 18, 2007 2:43 pm
by Adam-D
new brakes fitted
heres the old ones i removed
and here's my shiney new ones
]
Posted: Sun Feb 18, 2007 4:42 pm
by Adam-D
nope, all fine and dandy, bled first go, plenty of air in them and there solid now
Posted: Mon Feb 19, 2007 8:21 am
by Adam-D
also fixed my ariel, so fitted my headunit in
and fitted my inner door handles
Posted: Wed Feb 21, 2007 9:32 am
by Adam-D
tonights job was, a hours worth,
was in work all day so did this before
got some rear speakers,
and fitted them to rear panels
speakers,
and them fitted to the panel
not bothered about the colour, you cant see them, they dont have to be amazing etc as there only there for rear fill and i decided these would be more subtle than the 6x9's
Posted: Thu Feb 22, 2007 11:35 am
by Adam-D
6x9 were going in either there own enclosure, or rear door cards, and i have no rear seats. but the tidy'r it is the happyer i am
Re: silver sport project
Posted: Mon Feb 26, 2007 10:37 pm
by Adam-D
i have rubbed down and removed the surface rust from my front lower panel, then primer'd it.
it is now black as i have stonechipped it then waxoil'd it
my grill arrived aswell so im just waiting for my bumper back from being painted
and i sound deadn'd the doors
not a massive amount, but just enuff to make a difference
Re: silver sport project
Posted: Tue Feb 27, 2007 9:58 am
by Adam-D
dynamat has better deadening properties
ive used both the flashing stuff and dynamat
the flashing is good for your boot but for the doors its not good enuff
Re: silver sport project
Posted: Sun Mar 04, 2007 4:52 pm
by Adam-D
here is the bumper built
bumper fitted
Re: silver sport project
Posted: Sun Mar 04, 2007 8:47 pm
by srmtor_corsa
that looks ace...