Page 11 of 20
Re: Dans vectra c
Posted: Thu Mar 19, 2015 3:24 pm
by johnny
60 mil be very low for a family car would it not?
I think 30 mil would be enough while your carrying the baby about
I never thought I'd say somthing like that [emoji38]
Re: Dans vectra c
Posted: Thu Mar 19, 2015 5:32 pm
by Barraclough
I was debating this. There's also some at a 45mm drop but like it low
Re: Dans vectra c
Posted: Thu Mar 19, 2015 8:31 pm
by JamieTee_
Mines crazy low
Sent from my iPhone using Tapatalk
Re: Dans vectra c
Posted: Fri Mar 20, 2015 8:34 pm
by Barraclough
Met up with a guy from vectra-c.com today and finally had xenon activation and no more flickering/strobing
Also found out the easy way to take my service light off, press brake, press trip computer button then turn ignition on, never thought it would be so easy!
Got some ideas from his beaut of a car
Re: Dans vectra c
Posted: Sun Mar 22, 2015 5:09 pm
by Barraclough
Lights out ready to be sprayed
Re: Dans vectra c
Posted: Sun Mar 22, 2015 6:08 pm
by Barraclough
Doing headlights to
Re: Dans vectra c
Posted: Sun Mar 22, 2015 6:08 pm
by coupe77
You need a sub or 2 in that big boot mate
Re: Dans vectra c
Posted: Sun Mar 22, 2015 6:14 pm
by Barraclough
Got a chunky pram to fit in it these days
Re: Dans vectra c
Posted: Sun Mar 22, 2015 6:16 pm
by Barraclough
5 coats down. It's not the effect I wanted, wanted them fully blackened like on the Corsa
Re: Dans vectra c
Posted: Sun Mar 22, 2015 7:24 pm
by andy w
Thats the tints off 5 coats my stilo only had 3 and mine were this dark
Re: Dans vectra c
Posted: Sun Mar 22, 2015 7:32 pm
by Barraclough
What spray did you use
I used this
Re: Dans vectra c
Posted: Sun Mar 22, 2015 7:42 pm
by Barraclough
Not what I originally wanted but well happy with the results
Rears before:
Rears after:
Headlights before:
Headlights after:
Re: Dans vectra c
Posted: Sun Mar 22, 2015 8:25 pm
by andy w
I uded this and thort ya were fly eye the front?
Sorry about the side pic [emoji38][emoji38]
Re: Dans vectra c
Posted: Sun Mar 22, 2015 8:27 pm
by Barraclough
I was originally gone buy that one. Figured I'd give the spray a go and turned out well IMO. Not really a fan of fly eye when up close
Re: Dans vectra c
Posted: Sun Mar 22, 2015 9:54 pm
by Barraclough
May tint middle break light tomorrow. Also debating wether to debadge or keep plasti dipped griffin