Pricers Arden Blue B

Jamie1991 · Post by **Jamie1991** » Thu Sep 06, 2012 11:01 pm

New studs n nuts at vauxhall cheap, around 15 quid or Autovaux do them too

PRICER · Post by **PRICER** » Fri Sep 07, 2012 12:55 am

Nice il check them out cheers dude!

PRICER · Post by **PRICER** » Sun Sep 09, 2012 9:16 pm

just found out how tight the crank bolt that came loose on my XE has got to be, 184 lb-ft then angle turn 40-50degree thats FOOOOOKIN TIGHT!!!

Jamie1991 · Post by **Jamie1991** » Sun Sep 09, 2012 9:48 pm

Lol! When I tried my torque wrench didn't go that tight, so had to use breaker and still only manage quarter of a turn ontop of that! I'd say mine isn't as tight as ment to be, but it's been fine so far! Touch wood!

PRICER · Post by **PRICER** » Sun Sep 09, 2012 9:52 pm

yea tbf i recon just the 184lb-ft will be more than enough, i'l have to see how i get on 2moro anyway. fingers crossed i'd like it running

but dunno depends how i get on.

scorpiotn1 · Post by **scorpiotn1** » Sun Sep 09, 2012 10:00 pm

Lads any links to a good Tourge wrench ? i recently bought a set of tools, but still missing a tourge wrench and after the proplem that time i had rebuilding the engine and not tighting the head bolts to the correct Tourge etc etc..

Thanks.

PRICER · Post by **PRICER** » Sun Sep 09, 2012 10:04 pm

this is mine,

http://www.ebay.co.uk/itm/Draper-Torque ... _500wt_969

PRICER · Post by **PRICER** » Mon Sep 10, 2012 5:05 pm

just went and got my head that i took to see if they could mend it and how much, but i got a second hand head of my mate for £35 so i went and collected my other head and here is one valve, they're pretty much all the same lol also you can see the condition on the head in the same photo, and now just imagine that indentation on top of the piston itself lol not good :/

RyanB21 · Post by **RyanB21** » Mon Sep 10, 2012 5:19 pm

Straight as a roundabout that is. Well its good to hear you have replacement parts and sorted the source of all evil that done this to the pretty XE

PRICER · Post by **PRICER** » Mon Sep 10, 2012 6:02 pm

I swear this engine doesn't want to be in one piece lol

Jamie1991 · Post by **Jamie1991** » Mon Sep 10, 2012 6:12 pm

Forged pistons......

PRICER · Post by **PRICER** » Mon Sep 10, 2012 6:59 pm

that means a re-bore tho

PRICER · Post by **PRICER** » Tue Sep 11, 2012 8:54 pm

i have good news

its back on the road, and sounding phenomenal again

must have had the timing out before as this time sounds and back fires like it did when i first went to get it from the rolling road so woo i'l get some videos up before long of the noise

gazza_no7 · Post by **gazza_no7** » Tue Sep 11, 2012 9:14 pm

Good

so glad it's back working mate!!

RyanB21 · Post by **RyanB21** » Tue Sep 11, 2012 11:03 pm

Wheyyy bet it sounds gooood! Glad mate

Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

Pricers Arden Blue B

Re: Pricers Arden Blue B

Re: Pricers Arden Blue B

Re: Pricers Arden Blue B

Re: Pricers Arden Blue B

Re: Pricers Arden Blue B

Re: Pricers Arden Blue B

Re: Pricers Arden Blue B

Re: Pricers Arden Blue B

Re: Pricers Arden Blue B

Re: Pricers Arden Blue B

Re: Pricers Arden Blue B

Re: Pricers Arden Blue B

Re: Pricers Arden Blue B

Pricers Arden Blue B

Re: Pricers Arden Blue B