Page 13 of 15

Re: Corsa 1.0 envoy, silver.

Posted: Sun Sep 09, 2012 10:05 am
by Jamie1991
Good stuff, can't beat a bargain :thumbs:

Re: Corsa 1.0 envoy, silver.

Posted: Sun Sep 09, 2012 12:19 pm
by PRICER
nice! thats cheap haha :)

Re: Corsa 1.0 envoy, silver.

Posted: Mon Sep 10, 2012 5:23 pm
by RyanB21
Finally recieved last l piece today and bonus it came with a jacking cover only 3 to go lol. Its turquoise atm and sets me back £70 so far but its complete and the side skirts have every lug in place :D the rear arches too but the front needs to be stuck on :/ im assuming the rear arches will go on the way my ones will come off? Ive decided to do the skirts properly and buy 16 plastic clips. Is it best to self taper the clips on and then slide the skirt over?

Re: Corsa 1.0 envoy, silver.

Posted: Wed Sep 19, 2012 7:37 pm
by nath2905
if you drill the sills make sure you wax oil it cus they will rust very fast, my skirts are just bonded on

Re: Corsa 1.0 envoy, silver.

Posted: Wed Sep 19, 2012 8:00 pm
by Jamie1991
:doh: whoops, I've drilled the sills and never treated them! Hope mine have rotted

Re: Corsa 1.0 envoy, silver.

Posted: Thu Sep 20, 2012 6:37 pm
by RyanB21
As much as id like to do it properly i think bonding is going to be cheapest fastest way. I doubt id ever remove them after anyway. Thanks guys

Re: Corsa 1.0 envoy, silver.

Posted: Thu Sep 20, 2012 9:35 pm
by scorpiotn1
Jamie1991 wrote::doh: whoops, I've drilled the sills and never treated them! Hope mine have rotted

Crap i think i ment to coat mine as well but in the rush getting them may have forgot :doh:

Re: Corsa 1.0 envoy, silver.

Posted: Sat Sep 22, 2012 7:56 pm
by RyanB21
Just realised today after putting in passenger calibra leather that the yellow tags howing on my seat belts are because the arms have fired off previous. Salvaged a passenger one from my old seat now ned drivers as im sure it will fail mot at some point. Im realky saving to move out now so not many plans. Side akirts sprayed and put on and want alloy furbed. Going to paintthem my self, graphite with a polished rim.

Also after being pulled over by a "vehicle inspector" police lol iv changed rear suspension to 50mm but stil damper with pi shocks. Raising the front too and changing headlight bulbs back to standard or white. Not alowwed yellow. Supose saves me gettin points.

Re: Corsa 1.0 envoy, silver.

Posted: Mon Sep 24, 2012 1:26 pm
by PRICER
thought you were allowed yellow legally,

http://www.dmv.ca.gov/pubs/vctop/d12/vc25950.htm

The emitted light from all lamps and the reflected light from all reflectors, visible from in front of a vehicle, shall be white or yellow,

Re: Corsa 1.0 envoy, silver.

Posted: Mon Sep 24, 2012 7:02 pm
by RyanB21
Sweet thanks pal! Anything about lowering mines like inch of the tyre at back and front :( but i spose it will do for these wintery months

Re: Corsa 1.0 envoy, silver.

Posted: Mon Sep 24, 2012 7:03 pm
by RyanB21
It also say california department of vehicles?

Re: Corsa 1.0 envoy, silver.

Posted: Mon Nov 05, 2012 7:15 pm
by RyanB21
Hey its been a while been super busy! Few updates to be followed by pics later. My insurance renews tomorrow! I am now fully comp for £1252 a year which beats last years £2789! So very happy! Iv removed the stickers off my car now looks so much cleaner and smarter. Side skirts are under way the progress pics will be up soon. Where can i purchase tiger seal?

Re: Corsa 1.0 envoy, silver.

Posted: Mon Nov 05, 2012 7:44 pm
by gazza_no7
You can get it off ebay mate :) not sure where else you can get it though

Re: Corsa 1.0 envoy, silver.

Posted: Sun Jan 06, 2013 5:52 pm
by RyanB21
Not many updates jus serviced the car, snapped my t40 piece in the sump nut :( but got it done in the end. Iv removed fog light bulbs and added an external fog light that sits under the rear bumper in the middle, bit of a jap look. Jus bought a punto rear wiper to go on, im going to price up to get my front bumper number plate recess smoothed and continue with the graphite colour coding. Had my eye on a set of deepdish BBS LOOKALIKE alloys ready for pvs. Thats all so far i want a rev counter dash but will it plug and play?

Re: Corsa 1.0 envoy, silver.

Posted: Mon Jan 07, 2013 12:20 am
by Jamie1991
Sounds good pal, have to stick up some pics