Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

you best have it all back togeather for pvs =]

oh and you have opted for the rear disc setup then? what are you going to do about this supose'd rear wheel lockup under braking? thats all that scares me about putting my rear disc beam on...

i may use the rear disk setup i dont know, all depends on time and money i suppose

and as for the locking up, i could maybe fit reducers (cant remember the exact name) to reduce the pressure to the back to stop them locking up or the more expensive route would be to fit a bias valve

so got some more done today

modifyed the engine loom so that all the wiring that origianlly came out on the righthand side now goes though where the injectors go so that it is hiden away, the majority of it is tucked up away under the inlet manifold

few pictures





the area that needs paining


where the live wire goes



battery


cheers

looking good mate what other things you still to do before pvs?

thats loads better

looks really obvious that somethings missing now but cool its coming along, i think you should put black plastic trim in your for your next thing to do

Wow, pretty decent conversion!! Great stuff.

i think you should put black plastic trim in your for your next thing to do

he's getting it out of mine before she goes to the big scrapyard in the sky

matty101 wrote:

i think you should put black plastic trim in your for your next thing to do

he's getting it out of mine before she goes to the big scrapyard in the sky

indeed they are

Mike_Parr wrote:Wow, pretty decent conversion!! Great stuff.

thanks mate

nath2905 wrote:thats loads better

i agree mate, cheers

PRICER wrote:looks really obvious that somethings missing now but cool its coming along, i think you should put black plastic trim in your for your next thing to do

yh it does take some getting used to, bet i will still manage to open the bonnet one the day the car goes flat to realise its not in there anymore

well the good news is it still runs exactly as it did before so ive odviously done it right

got some more done this morning, got the chassis leg fillered and sanded



grinded off the spot welds and then primered it all



and some colour





also did the panel under the airbox as there was a crease and a rust mark from where it had its crash





going to leave it now till monday to harden off then i can remove the tape and give it a polish

cheers

cool, its coming along, what you going to fill the space with? or are you trying for an empty bay?

empty bay. what would i put in there if i did??

havent a clue, tv and xbox perhaps?