Brocade 2.0 16v

PRICER · Post by **PRICER** » Mon Jul 25, 2011 1:58 pm

what you done to the barrel? and how easy was it to remove the dash?

Jamie1991 · Post by **Jamie1991** » Mon Jul 25, 2011 5:57 pm

the 'blackbox' thing i broke tryin unplug it. i go scrapyard to get a new one, but unless i can grab a lift i got 6 miles to walk

and yeah its fairly simple, just takes abit of thought n fiddle round with wires ect... but its not too hard

Post by **nath2905** » Mon Jul 25, 2011 6:30 pm

Jamie1991 wrote:the 'blackbox' thing i broke tryin unplug it. i go scrapyard to get a new one, but unless i can grab a lift i got 6 miles to walk and yeah its fairly simple, just takes abit of thought n fiddle round with wires ect... but its not too hard

get them legs going

Jamie1991 · Post by **Jamie1991** » Tue Jul 26, 2011 2:47 pm

well brought ignition switch from scrappy and now thats broke

i duno how it broke, all i know is that i had to force it apart to unplug it and when i fitted it, when u turn the key back u have to force it back will all your strength. soo i guess either 1 them has broke it. i ordered brand new 1 now, i wont have to unplug that, soo i can just plug that in and hope it works fine or ill be throwing some tools about

Jamie1991 · Post by **Jamie1991** » Wed Jul 27, 2011 5:35 pm

had more luck today, another ignition switch came from postman pat, fitted it to the barrel and it works well with the key unlike last 2! will just have to wait to see if it works now when i reconnect up loom. also removed last of the tar today

thank god for that

Jamie1991 · Post by **Jamie1991** » Thu Jul 28, 2011 8:14 pm

primerd today, finally gettin somewhere

2mra guna rub it down n go over anywhere that need more primer again. then soon in with the brocade!

essexjohn · Post by **essexjohn** » Thu Jul 28, 2011 10:44 pm

looks alot cleaner, kinda looks bigger inside aswell!

PRICER · Post by **PRICER** » Thu Jul 28, 2011 10:45 pm

you shud'v really removed the seat guides...

Jamie1991 · Post by **Jamie1991** » Fri Jul 29, 2011 9:21 am

PRICER wrote:you shud'v really removed the seat guides...

i tried, but them things was tight!! ending up rounding them in the end, ill just clean them with thinners after finished painting

PRICER · Post by **PRICER** » Fri Jul 29, 2011 9:49 am

ahh yer, they can be putting it politely 'anoying' i had them round on my old corsa, and just got them out on this one i got now for when i fitted the heated seats,

Jamie1991 · Post by **Jamie1991** » Fri Jul 29, 2011 6:01 pm

yeah they are a right pain, bet u was glad that they came out on yours

if i need them out i think ill weld another bolt on top n try that....
rear painted in brocade now

Purre Corsa BaBy · Post by **Purre Corsa BaBy** » Mon Aug 01, 2011 2:04 pm

niiice!

how did you get that black thing up under the rear seat? need to check if thats where my petrol smell is coming from

essexjohn · Post by **essexjohn** » Mon Aug 01, 2011 2:42 pm

looking good mate, did you use rattle cans or a compressor?

Jamie1991 · Post by **Jamie1991** » Mon Aug 01, 2011 5:32 pm

Purre Corsa BaBy wrote:niiice! how did you get that black thing up under the rear seat? need to check if thats where my petrol smell is coming from

i just used a screw driver or 2 to prize it out mate, can be abit tough at times thou!

essexjohn wrote:looking good mate, did you use rattle cans or a compressor?

used rattel cans mate, it comes out well for a rattle can, but it probs not better than spray gun, still good enough for me thou

essexjohn · Post by **essexjohn** » Mon Aug 01, 2011 5:52 pm

looks good for cans, got a nice shine to it have you laquered it yet?

Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

Brocade 2.0 16v

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)

Re: Brocade :)