Really enjoy the comments folks, and glad the project ive been doing helps others out too. Tomorrow i plan to buy a new tyre for the alloy, its a 195/50 r15 and gona cost £40. Then need to get them balanced too. Then il take some screens of them on the car.pinty1990 wrote:ahhhhh i seemed to have been the bringer of bad news. . . . sorry about that hope they do take them back for you without any hassle anywhooo
i wanted to get some vented and maybe drilled discs for mine too but seems like a no no for me too now my solids discs dont need changing yet just planned an upgrade lol
thats good news, might take a trip to the local scrappy then cause i think there reallllly nice, ive got the standard 14 inch alloys, not sure if there originally off the corsa but there five spokes
anyway even though i dont comment all the time im liking the project so far the car looks great and provides me with looootsss of info lol
Corsa B 1999 1.2 16V "1-7-11"
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
- Jamie1991
- CB-Uk User
- Posts: 825
- Joined: Mon Jul 11, 2011 9:40 am
- Location: Walsall
Re: Corsa B 1999 1.2 16V "1-7-11"
should buy these, astra gte 2L brakes. much bigger discs and wider than the vented discs you have now so will be mint for stopping and they usally go for around £30-£50
http://www.ebay.co.uk/itm/CORSA-NOVA-AS ... 19ce984a00
http://www.ebay.co.uk/itm/CORSA-NOVA-AS ... 19ce984a00
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
....
Cant wait for Summer!
- miles123
- CB-Uk User
- Posts: 154
- Joined: Fri May 20, 2011 12:56 pm
- Location: West London
Re: Corsa B 1999 1.2 16V "1-7-11"
Your wheels look banging mate, good work on the corsa!
Corsa 1.0 GSi Rep
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
- miles123
- CB-Uk User
- Posts: 154
- Joined: Fri May 20, 2011 12:56 pm
- Location: West London
Re: Corsa B 1999 1.2 16V "1-7-11"
Looks really smart mate, any other plans before your overhaul?
Corsa 1.0 GSi Rep
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
Bit broke now after forking out £60 for the new wheel.miles123 wrote:Looks really smart mate, any other plans before your overhaul?
£40 new wheel + £20 (£5 per wheel) for balance and weights, the weights are the ones that fit on the back of the rim not the face.
Then the discs are gona need to be sent back and proper ones sent out. when i get paid at end of month that can go towards the head skim and engine paint and Arden blue for the plastic grey trim, i want to colour code it and remove the door bump strip. So basically .. No
Nothing planed until April. then il have plenty to show
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
- miles123
- CB-Uk User
- Posts: 154
- Joined: Fri May 20, 2011 12:56 pm
- Location: West London
Re: Corsa B 1999 1.2 16V "1-7-11"
ohh okayy i look forward to seeing it all done
I know how you feel with being broke!! lol
Just had a complete overhaul done recently and now in the process of replacing the clutch pedal and fitting my 4th (but this time genuine) clutch cable
I know how you feel with being broke!! lol
Just had a complete overhaul done recently and now in the process of replacing the clutch pedal and fitting my 4th (but this time genuine) clutch cable
Corsa 1.0 GSi Rep
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
My mate found this in a scrap yard, he said it was attached to a corsa.
Just wanted everyones feedback on it to see what they make of it. As you can see they are vented discs, they dont look huge, more like 235mm which is same as my vented ones. Also look at that caliper, its quite rusted up and theres not one bita paint on it, is it the original caliper, sugesting the vented disc will fit ok. ???
i dont wana send back my vented ones untill i figure out whats best to do, really need some feeb back on this folks.
Just wanted everyones feedback on it to see what they make of it. As you can see they are vented discs, they dont look huge, more like 235mm which is same as my vented ones. Also look at that caliper, its quite rusted up and theres not one bita paint on it, is it the original caliper, sugesting the vented disc will fit ok. ???
i dont wana send back my vented ones untill i figure out whats best to do, really need some feeb back on this folks.
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
-
- CB-Uk User
- Posts: 350
- Joined: Tue Apr 26, 2011 10:05 pm
- Location: bristol
Corsa B 1999 1.2 16V "1-7-11"
Rust don't matter mate as long as they work and are not leaking.
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa B 1999 1.2 16V
Sorry i dont intend to take these ones from the picture above. what i ment was this car has vented discs on a corsa, using it as a reference to see if my vented discs will fit on my corsa without replacing the calipers.matty589 wrote:Rust don't matter mate as long as they work and are not leaking.
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
- gazza_no7
- CB-Uk User
- Posts: 1532
- Joined: Tue Aug 16, 2011 8:01 am
- Location: Barton Upon Humber
Corsa B 1999 1.2 16V "1-7-11"
You will need to change the callipers as the vented discs are thicker than the normal solid discs
- PRICER
- CB-Uk User
- Posts: 3510
- Joined: Sun May 10, 2009 9:21 pm
- Location: ludlow shropshire
Re: Corsa B 1999 1.2 16V "1-7-11"
no thats not necessarily true, corsa 1.4's came with vented discs. the chances are yes they will fit, why dont you just try it and find out, its not hard to swap really. or get on ebay and order a set of 2.0 16v calipers and new discs, and send yours back.
TURBO LAG IS JUST FOREPLAY
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
Thanks for the feedback and advice.
Think the best way to find out would be to try and fit the vented discs i have. if they dont fit, il send them back to Autovuax for Solid Discs. Im on tight budget now and dont wana be out the extra money fitting new 2.0 Calipers and Discs. That would be something i could do at a later stage when im a bit more Flush.
Think the best way to find out would be to try and fit the vented discs i have. if they dont fit, il send them back to Autovuax for Solid Discs. Im on tight budget now and dont wana be out the extra money fitting new 2.0 Calipers and Discs. That would be something i could do at a later stage when im a bit more Flush.
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
- pinty1990
- CB-Uk User
- Posts: 67
- Joined: Fri Apr 15, 2011 12:32 pm
Re: Corsa B 1999 1.2 16V "1-7-11"
got a funny feeling the 1.0l and 1.2s are solid discs and 1.4-1.6 are vented dunno how true this is but it would kinda make sense
Nothing worth doing is ever easy!
-Arden Blue 1.2 16v-
-Arden Blue 1.2 16v-
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
This is my current solid disc and caliper set up, i dont think its gona fit ( thats the good think about alloys, you can clearly look through the gaps to see the disc, cant do that with the steel wheels on
Oh and also need to add that, the guy used the Stick on balance weights not the clip on ones
Oh and also need to add that, the guy used the Stick on balance weights not the clip on ones
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR