Re: Arden Blue - Corsa B 1.0
Posted: Sat May 30, 2015 12:52 am
Few updates I forgot to post on here for anyone interested.
23/5/15
update time, not a good one though
been doing the front bumper past few days, finished it off this morning all went well...
Un-till i went in for a while that is. When i came back i found something had landed on the part id just painted, must have been literally just as i left when the paint was still very wet as the mark(s) where very noticeable no way i could leave it looked proper poo.
I did think about just putting old arches back on properly and getting a new front bumper and being done with it as i was pretty gutted but decided to wait for it to dry and scarped/rubbed it back down.
Will be getting back on with it again soon, still got to do two arches and the rear and front bumper.
took one of the rear arches off so i could have a look to see what the glossed one will look like on, will definitely be worth all the hassle and effort it the end
Will be stripping all the arches off soon so any rust underneath can be treated and painted before new ones go on.
28/5/15
Got steering wheel fitted today, only issues are the fact air bag light is on.. Either going to take bulb out or get a resistor. Also the horn isn't working at the moment, hopefully get that sorted soon as my MOT is in July.
29/5/15
Got some nicer the photos of the interior today. The interior is pretty much done now still keeping an eye out for some of those vauxhall floor mats though think that would finish inside off nicely.
and one of how the outside looks at the moment.
Got a few things that need to be sorted ASAP.
-Tracking needs doing as i just got new tyres due to the old ones wearing unevenly
-Need to get horn working or get a horn wired to a button if i can't
-Remove airbag light bulb
-Need a new screw in drivers sun visor
-Need to bolt the rear seat belts back properly so the plastic thing moves when the belt is pulled, (i bolted them all back wrong at first when i was putting back the pillars after doing them black then once i realised i did the fronts properly but never got round to the rear ones as they aren't used.
then i can get back to doing the bumpers and arches.
23/5/15
update time, not a good one though
been doing the front bumper past few days, finished it off this morning all went well...
Un-till i went in for a while that is. When i came back i found something had landed on the part id just painted, must have been literally just as i left when the paint was still very wet as the mark(s) where very noticeable no way i could leave it looked proper poo.
I did think about just putting old arches back on properly and getting a new front bumper and being done with it as i was pretty gutted but decided to wait for it to dry and scarped/rubbed it back down.
Will be getting back on with it again soon, still got to do two arches and the rear and front bumper.
took one of the rear arches off so i could have a look to see what the glossed one will look like on, will definitely be worth all the hassle and effort it the end
Will be stripping all the arches off soon so any rust underneath can be treated and painted before new ones go on.
28/5/15
Got steering wheel fitted today, only issues are the fact air bag light is on.. Either going to take bulb out or get a resistor. Also the horn isn't working at the moment, hopefully get that sorted soon as my MOT is in July.
29/5/15
Got some nicer the photos of the interior today. The interior is pretty much done now still keeping an eye out for some of those vauxhall floor mats though think that would finish inside off nicely.
and one of how the outside looks at the moment.
Got a few things that need to be sorted ASAP.
-Tracking needs doing as i just got new tyres due to the old ones wearing unevenly
-Need to get horn working or get a horn wired to a button if i can't
-Remove airbag light bulb
-Need a new screw in drivers sun visor
-Need to bolt the rear seat belts back properly so the plastic thing moves when the belt is pulled, (i bolted them all back wrong at first when i was putting back the pillars after doing them black then once i realised i did the fronts properly but never got round to the rear ones as they aren't used.
then i can get back to doing the bumpers and arches.