Page 3 of 6

Re: wiring help (nova loom)

Posted: Sun Apr 15, 2012 7:17 pm
by c16se corsa
i cant seem to find this picture :/

Re: wiring help (nova loom)

Posted: Sun Apr 15, 2012 7:39 pm
by paige1992
Image

Re: wiring help (nova loom)

Posted: Mon Apr 16, 2012 12:14 am
by c16se corsa
hmmmmm im going to have to refer to autodata for that one al get back to you tomorrow on it

Re: wiring help (nova loom)

Posted: Mon Apr 16, 2012 12:50 am
by c16se corsa
right managed it the brown/red brown/blue is the coolant temp sensor under the dizzy and your other spare i for a nock sensor that goes on the back of the block under the inlet if you dont have one there the same on c20xe there will be a threaded hole for it just for a 13mm bolt or anything with m8 thread

Re: wiring help (nova loom)

Posted: Mon Apr 16, 2012 5:58 pm
by nath2905
hmmmm if thats the case, that brown/red/brown/blue, has got to be extended loads to reach the other side,

then i'll have a white plug spare and none for that grey tube and TPS hmm, so technical :lol:

Re: wiring help (nova loom)

Posted: Mon Apr 16, 2012 6:27 pm
by c16se corsa
the colours are according to autodata but on the later type e16 it has a air temp sensor in the inlet pipe and that is the colours for it aswell, white plug pfft erm it could be for your grey tubemabobythingy icv

Re: wiring help (nova loom)

Posted: Mon Apr 16, 2012 6:45 pm
by nath2905
found some pictures on the net....
white is temp
between injector 2-3, is that silver tube,

so that 2 pin has got the be the TPS, but mines 3 pin :S :lol:

Re: wiring help (nova loom)

Posted: Mon Apr 16, 2012 6:47 pm
by nath2905
do you know if they did a 2pin tps or crank?

Re: wiring help (nova loom)

Posted: Mon Apr 16, 2012 6:55 pm
by c16se corsa
no its always 3 pin

Re: wiring help (nova loom)

Posted: Mon Apr 16, 2012 8:08 pm
by nath2905
juest read e16se dont all have crank shaft sensor's,
if so that would be the TPS plug and everything would connect

also it said some didnt have knock either :meh:

Re: wiring help (nova loom)

Posted: Mon Apr 16, 2012 8:20 pm
by c16se corsa
never thought yours is on dizzy so it wont need the crank sensor! what a d**k

Re: wiring help (nova loom)

Posted: Mon Apr 16, 2012 8:25 pm
by nath2905
god dam! thats the problem then :lol:

never mind mate thank you for all your help :)

i owe you a few beer's ;)

will let you know how it all goes on next attempt

Re: wiring help (nova loom)

Posted: Mon Apr 16, 2012 8:52 pm
by c16se corsa
hoping to get this sri done for pvs maybe see you there if your going!

Re: wiring help (nova loom)

Posted: Mon Apr 16, 2012 9:11 pm
by nath2905
:(, everyone is going but me.... i'm on my way spain that day, was mint last year too

Re: wiring help (nova loom)

Posted: Mon Apr 16, 2012 9:13 pm
by c16se corsa
damn....you can go to spain anytime you wish! but pvs onlt comes once