Page 3 of 11

Re: 1.0tr slow n low

Posted: Tue May 15, 2012 3:06 pm
by PRICER
why whats wrong with the spoiler? what was wrong with giving it a light sand down with some wet and dry, base coat it, and then top coat it?

1.0tr slow n low

Posted: Tue May 15, 2012 4:30 pm
by neil22
It was a night made mate I gave it a light sand ad the primer went on beautiful but only put 2 thin layers (think that's where I went wrong) any way I applied my black coat and the original paint must have been celulas based and my paint was acrylic so I think that's why it reacted like Image

I been sanding for 23 hours in total and finally ready for paint.

Image

It was a right pain to strip back off. And worse of all the paint went on quicker n thicker then wanted so it built up fast.

I just gonna use about 10 layers of primer just to be safe :P

Re: 1.0tr slow n low

Posted: Tue May 15, 2012 9:13 pm
by RyanB21
Thats a cool look lol like leather ;) haha i might wrap my hole car in leather lmao ;)

1.0tr slow n low

Posted: Tue May 15, 2012 11:21 pm
by neil22
Lol I hated that spoiler but it's just started to look ok now :)

1.0tr slow n low

Posted: Tue May 15, 2012 11:25 pm
by neil22
How's ur leather Interia coming along

1.0tr slow n low

Posted: Wed May 16, 2012 11:23 am
by neil22
Finally got to start primer today. Good few coats going on let me tell ya.

Image

Re: 1.0tr slow n low

Posted: Wed May 16, 2012 12:12 pm
by RyanB21
Looking good buddy, havent made progress yet ill have pics up on thread ill start tomorrow, you not going to do this spoiler blue ??

1.0tr slow n low

Posted: Wed May 16, 2012 1:07 pm
by neil22
I was going black and blue to break up the colour abit I'm still not happy with the finish. After aplying the primer I've noticed some small dimples in it, can't feel them but the shade on the paint makes it noticeable. So I'm going to order some of that and then carry on lol. Im going to take is slow this time and try and get best possible finish.

1.0tr slow n low

Posted: Wed May 16, 2012 1:08 pm
by neil22
Order some fine surface filler **

1.0tr slow n low

Posted: Wed May 16, 2012 7:29 pm
by neil22
Just a quick update on my stickers lol
Image
Image

Re: 1.0tr slow n low

Posted: Thu May 17, 2012 11:34 pm
by scorpiotn1
Nice,

i wana re-do my wiper arms and use more primer layers then add a few more matt layers. as my wiper arms have started to chip paint and rust a bit.
And if i can get them cheap enough i wouldnt mind picking up a standard wheel arch trim so i can practice sanding out the texture, prime and colour coat it.
a good one to try and get might be the boot lock surround do a good job on it and just do a direct replacment.

Re: 1.0tr slow n low

Posted: Fri May 18, 2012 8:46 am
by RyanB21
Dude thts wht i done, went scrappy and got boot lock and door handles lots of sanding :) but worth it

1.0tr slow n low

Posted: Fri May 18, 2012 9:12 am
by neil22
Yeah wiper arms are what I wanna doo too, the door handles and arch trim I want to leave but get lint seed oil because it's better then back to black (apparently) lol.

Bastard spoiler reacted slightly again with top coat. Begin ing to think its contaminated. It had loads of thin layers of primer and was great but it's the top coat every time.

Gonna have a word with jawel paints n see what they say.

1.0tr slow n low

Posted: Fri May 18, 2012 11:35 am
by gazza_no7
It might be to paint reacting to the primer... Bad mix of paint or something

1.0tr slow n low

Posted: Fri May 18, 2012 12:47 pm
by neil22
Standard rattle can paints mate and same company paints being used. I've never had this kind of hassle before but I'm gonna beat it lol.

On another note got an update on dhl tracking to this

"05/18/2012 08:45 clock The shipment has left the package import center in the target country"

They gotta be here today can't bleeding wait lol getting her slammed then some Cav slags and all will be good.