Page 3 of 12
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 7:22 pm
by JamesT0708
I'm on it then, always wondered about the rear side windows as no-one ever looks through them anyway haha. Just decided to go out and smooth my boot handle on a whim so i'll let you know how it goes. Dunno why I chose to start at 6pm because there's no chance i'll get it done before dark, oh well
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 8:37 pm
by Blackie_No1
Rear side windows can be as dark as you like as it's not a safety feature to see out of them
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 9:11 pm
by JamesT0708
Just finished my boot handle and i'm actually pretty impressed considering it's took me less than 3 hours. Gone from this;
Too this in a couple of days only £1.79 down;
Easily 2 of the best things I've done to the car since I got it. They cost me £1.79 between them and took about an hour of actual work to do both. Everyone should do it!
Sent from my GT-I9505 using Tapatalk
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 9:42 pm
by andy w
From what's been put earlier James my rear sides are 20% tinted and the police ain't ever bothered since i did mine and me and Dan got pressed plates on our cars from a guy on ebay cost £20 and mine turned up a day after i ordered them if ya intrested mate
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 9:44 pm
by JamesT0708
andy w wrote:From what's been put earlier James my rear sides are 20% tinted and the police ain't ever bothered since i did mine and me and Dan got pressed plates on our cars from a guy on ebay cost £20 and mine turned up a day after i ordered them if ya intrested mate
Gonna have a look at some tint now, cheers mate. My plates were dispatched on Friday so they should be here tomorrow, fingers crossed!
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 9:51 pm
by andy w
Hopefully mate if its the same guy ne and Dan used they are normally really quick sending them
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 9:52 pm
by andy w
Oh to add the tint i got was a fiver for a 1.5 metre x 300mm uncut length which was plenty enuff on my more door
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 9:55 pm
by JamesT0708
andy w wrote:Hopefully mate if its the same guy ne and Dan used they are normally really quick sending them
They were £20 so it's probably the same, my plates are s**t atm haha
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 10:00 pm
by andy w
Mine were mate and ye he probably is did urs have a high pos feed back
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 10:06 pm
by JamesT0708
andy w wrote:Mine were mate and ye he probably is did urs have a high pos feed back
YEah mate, should have them on tomorrow
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 10:10 pm
by andy w
Good lad and u ave a shed load of sticky pads for them off the guy aswell
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 10:13 pm
by Barraclough
andy w wrote:Good lad and u ave a shed load of sticky pads for them off the guy aswell
The ones I'm getting come with them sticky pads, are they any good? Lots of the feedback say they fall off so I'm going for the irmscher holder.
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 10:30 pm
by JamesT0708
Yeah mine come with the sticky pads but never had any trouble with them before
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 10:34 pm
by Mike_Parr
Looking a bit euro there mate! Lovely wok!!
Re: Atlantis Blue 1.0L
Posted: Mon May 12, 2014 10:36 pm
by JamesT0708
Mike_Parr wrote:Looking a bit euro there mate! Lovely wok!!
Thanks mate, it'll do until I can get my R34 Skyline
