Page 25 of 28

Re: GSi 8v project - Going 16v...

Posted: Wed Sep 30, 2009 11:32 pm
by corsameriteman
sorry keybourd dodgy i meant luck not lick :lol:

Re: GSi 8v project - Going 16v...

Posted: Wed Sep 30, 2009 11:33 pm
by kie-1200sxi-shed
loooking guuurd lads, use shud open your own garage lol 8)

Re: GSi 8v project - Going 16v...

Posted: Thu Oct 01, 2009 10:10 pm
by Chrex
2nd day update

Today had a very slow start...and i didnt really get going until about half one tbh, after i'd retrieved the tie-rods from a breaker. I would be lying if i said i motivaion for the day's work. However, i had the help of my girlfriend Lou where i needed it.

Image

Image

Firstly, some pics of the engine in the bay that i didnt get y'day. :)

Image

Image

Image

I also trial fitted the inlet and carbs. Turns out its a good job we cut the bulkhead...

Image

Image

Image

Next up was putting the ball joints, lower arms and hubs/shafts all together and on the car... this involved much swearing...but Lou was again a big help where hands were needed.

Image

Image

Image

Image

Image

btw, no i didnt get her to do it all...i just took photos at moments of lapse, and she's been helping throughout the project...but never been in any photos, so i sorted that! :lol:

Last few things involved moving wiring and tidying around the engine bay...and then it went dark and started raining. Got dizzy on and linkage sorted etc.

Image

More to come still tomorrow! :wave:

Re: GSi 8v project - Going 16v...

Posted: Thu Oct 01, 2009 10:50 pm
by kie-1200sxi-shed
comming along nice to see that gf's can be more usefull for more than 2 things lmao . go lou :D

Re: GSi 8v project - Going 16v...

Posted: Thu Oct 01, 2009 11:26 pm
by CorsaTD
sweeeet! 8)

Re: GSi 8v project - Going 16v...

Posted: Fri Oct 02, 2009 7:16 am
by corsaboi1992
yr r goin quick lol looks a bit quicker alrdy lol

Re: GSi 8v project - Going 16v...

Posted: Fri Oct 02, 2009 5:13 pm
by roperstun
haha yea i bet she was making the tea aswell :thumbs:

looks like good progress so far

when are you hoping to get it on the road?

Re: GSi 8v project - Going 16v...

Posted: Sat Oct 03, 2009 11:15 am
by Chrex
hey. was a crap day yesterday. piping didnt want to fit and logistics went up the wall.

I managed to get all but one hose connected, inlet on, alternator on and re-routed the fuel hosing to tidy it up.

Last night though when the car was collected, it still wasnt running and i really had a crap night (having to get train and organise a tow for this morning).

This morning it was meant to be done at 10, but when i went to get it...they hadnt even turned up to open the garage. My stomach is turning over as it is without having to wait longer.

Am hoping i can get a pipe that fits on the coolant outlet on the inlet manifold, and get it running today then.

Am really fed up and i'm starting to lose my cool with it all. :x

Re: GSi 8v project - Going 16v...

Posted: Sat Oct 03, 2009 11:29 am
by kie-1200sxi-shed
bad to hear dat m8y,. but i dnt expect the motogod gunna just let you have such a fast car withought some sweat and tears :D but yall get ther :)

Re: GSi 8v project - Going 16v...

Posted: Sat Oct 03, 2009 3:04 pm
by corsaboi1992
every car has its ups and downs this is ur down it will all go up when you feel the torqe of this motor ;)

Re: GSi 8v project - Going 16v...

Posted: Sat Oct 03, 2009 11:06 pm
by Chrex
well i got the exhaust done, although it remains to be seen if it blows or not...

then when i got back i managed to get various other little bits sorted, finally get the engine in and attempt to make it turn over. Still...it wasnt to be.

It seems to have a refusal to fire, and i have a feeling its down to ignition timing and the fact that the spark plugs are not in the best of health. Still...progress appeared to have been made and i certainly hope to get it going tomorrow...else it will put me over the edge.

It really has been a crap week...and i am hoping that tomorrow will be the good ending to it all.

:wave:

p.s. anyone interested in buying an XE corsa?? :coffee:

Re: GSi 8v project - Going 16v...

Posted: Sun Oct 04, 2009 9:13 am
by roperstun
DONT YOU DARE SELL IT CHRIS :rant:

ur jst nnoyed cuz it aint going right and if u sell it your just going to kick to yourself

just stick with it you will sort it out then yourl have lots of fun in it

Re: GSi 8v project - Going 16v...

Posted: Sun Oct 04, 2009 11:46 am
by corsaboi1992
roperstun wrote:DONT YOU DARE SELL IT CHRIS :rant:

ur jst nnoyed cuz it aint going right and if u sell it your just going to kick to yourself

just stick with it you will sort it out then yourl have lots of fun in it
i agree :)

Re: GSi 8v project - Going 16v...

Posted: Mon Oct 05, 2009 9:03 pm
by Chrex
okay...its running now. Had a problem wit the oil pump relief valve, but a new pump and the problem is sorted. (thanks to phil for coming and swapping that for me!)

However, in the long list of things, i took it for a drive...and the front right bearing in the 'new' hubs is hammered, so i am gonna have to replace that tomorrow. Is going to a decent garage to get done, as i am on the verge of setting fire to it.

So yea...runs, drives...sounds a f**k beast and i cant drive it! Woo!! :|

Hoping this is it now...

Re: GSi 8v project - Going 16v...

Posted: Mon Oct 05, 2009 9:08 pm
by roperstun
dnt set fire to it donate it to me

this is gna be such a beast wen you get all the niggling things sorted

and your FU*KING love it 8)