Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

still no update for you guys just have not had time here are some pics of stuff waiting to go on the car
genuine rear mud flaps

car wireing loom

electric windows


i also have a smooth petrol flap but dont have a pic
i will hopefully have all this on the car soon and get round to smoothing the front bumper
then i can start spraying

how much them them window's rob you?

nath2905 wrote:how much them them window's rob you?

i got them for £30 off a mate he got them for his car but did not have the wires on the car loom.

still not done any thing on the car just some more pics of new stuff i got for the car
delocked door handles

smooth fuel flap

and lights for the footwells i will fit them when i do the electric windows.


i should have a better update for you guys next week as i have the week off work

ok so i started on the electric windows 2day but it did not go so well
i got the dash and everything out and i started by tidying up the alarm wireing because i put that in with the dash in.
i then set about taking the old loom out but i thought i hope i have all the pins in the connector that comes from the ignition to the n/s/f foot well and guess what.
i dont so after spending nearly all day doing it i had to put it all back together because i cannot get the new loom as no one has one for sale.
so that was a good start to my week off. 2morrow i will start smoothing the front bumper lets hope that gose better

i had do that, and just give up and didnt put them in

nath2905 wrote:i had do that, and just give up and didnt put them in

im thinking about just giving up lol depends if i can get the other loom i need and how much it is.

ok guys bit of a update i have spent the last day or so smoothig the front bumper its going ok but i hate useing filler as i can never get it smooth hers some pics so far



i also painted my smooth petrol flap


i hope to have the bumper finished 2morrow i had to stop 2day because its raining

nice work should look awesome when finshed bumper

Jamie1991 wrote:nice work should look awesome when finshed bumper

thanx mate i hope so .

I've just installed elec windows in my passenger side yesterday matey just about to do the drivers side. I didn't have the car loom either, it is literally adding 4 wires each side, i'll take some pics for you

sassnowwolf wrote:I've just installed elec windows in my passenger side yesterday matey just about to do the drivers side. I didn't have the car loom either, it is literally adding 4 wires each side, i'll take some pics for you

ok mate thanx. that will be a big help.

Didn't have chance to take any photos. But if you follow the guide up to the wiring point, i can tell you which wires you need.

Pull the rubber back on the door loom multi-plug and you need to find the following on the passenger side.

Red- live
black- ignition live
brown- earth
red/blue- window up/down
green/gray- window up/ down.

The drivers side is exactly the same, however rather than there being a single black wire going to the multi plug, you will see two wires joining to one, then going into the plug. This is the ignition live for both of the switches at the drivers side.

Connect red to a permanent live (mine being a secondary fusebox in my glovebox)
Connect black to an ignition live (mine being the black wire on the cigarette wiring)
connect brown to an earth (i ran mine along the A pillar to the roof where my sunroof motor is, alternatively attach the brown to any part of bare metal on the car)
Connect red/blue to the other red/blue.
Connect green/ great to the other green/ grey.

Hope this makes sense, took me days to work out in frustration. I'll write up a tutorial soon.

thanx mate that will be a help. in my car i only have 2 wires going to the doors but i will cut the bit i need off my new loom.
when you say "Connect red/blue to the other red/blue. Connect green/ great to the other green/ grey."
what do u connect them 2? do you mean run them from one door to the other ?
also what amp wire did you use?

I have no idea what amp wiring i used from the battery to my fusebox as i bought an amp wiring kit from Amazon, which included a thick wire with an inline fuse for extra safety.
For the door loom wiring, i simply pulled the wires that were in my old door loom out and used these, they weren't the same colour all the way along but it saves a lot of money .

At both drivers and passengers side you'll have the same colour wiring, what i meant was, connect the red/blue wire from the drivers side to the passengers side, and vice versa.