Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

yeah thats how we decided member, there is a possibly that that sensor in the dizzy is nackered.. and is not sending the signal to say that the engine is turning, thats what i thought anyway

Has dizzy got 3 or 2 pins

3 pin's

Right am just trying to build a picture in my head of what could be missing lol, what about ignition amplifier ? That's part of the trigger system

Got that, and coil

So it's either got to be the hall sensor in the dizzy or there's no power to the ecu I would say

ok mate thanks, thick red is power isnt it?

Yeah the thick red is the constant power to it and the black one is the ignition switch live

i now have spark but no fuel, any idea's? tried 2 relay's the pump works, but it doesnt pressure or anything under the key, then obz doesnt get nothing to the engine

just a thought, you have put the lines on the right way around havent you?

the pump only works on cranking if its not then it could only be the wire from the engine loom to the car loom and if its getting fuel to the rail but nothings happening swap the fuel lines round on the rail

swaped lines one as it wouldnt get to the rail, then that sorted that, but the fuel only got there if we bridge'd one of the relay connector's

the blue red wire?

http://www.ebay.co.uk/itm/120693714097? ... 911wt_1108

would that work for the dizzy?
as the one i have has the wrong connector thats why i had no sprak *hand over face*

should there be any stupid earths to like the rail or something?

I've got one of those dizzys that I don't need but that's the baby u want because it acts as the crank sensor and there should be a few earths poking out of the loom near the rail but the rail itself does not need to be earthed