Page 5 of 34
Silver X10XE Slow project
Posted: Sun Sep 01, 2013 12:05 am
by Teastick
Went on ebay last night before bed and bought :
2 x door hinge pins. My doors nock alot
2 x micro fibre drying towels
Microfibre wash mit
Polishing pads
Linseed oil
Heatgun
Black vauxhall logo dustcaps
Clear side indicators
Centre cap key
Re: Silver X10XE Slow project
Posted: Sun Sep 01, 2013 12:06 am
by Teastick
johnny wrote:Yeah it happens alot tbh theres nothing wrong with using them part from they scratch thevwheel
5 euro a wheel we charge but thats dealer garage, a tyre fitter is normally cheaper and you only need the fronts balanced
By fronts you mean just the front of the rim?
Or just the front wheels?
Re: Silver X10XE Slow project
Posted: Sun Sep 01, 2013 12:11 am
by johnny
The front wheels
4 wheels only be balanced on cars with independent back suspension
Just to say them weights probly are the oringnal weights from vauxhall but since then stick on weights mean no one uses them on alloys any more
Re: Silver X10XE Slow project
Posted: Sun Sep 01, 2013 1:17 am
by Teastick
johnny wrote:The front wheels
4 wheels only be balanced on cars with independent back suspension
Just to say them weights probly are the oringnal weights from vauxhall but since then stick on weights mean no one uses them on alloys any more
Cheers for that bud il get them done when finished
Silver X10XE Slow project
Posted: Mon Sep 02, 2013 10:03 am
by Teastick
Little update
Put battery back in yesterday and let it idle for five. Then took it for a five mile drive and it felt alot quicker / responsive. Madness.
And i fixed my mfd. it was because i cut the illumination wire. Derp
Also the rears of all wheels are primed. Just gotta do the fronts but im off to bed now so will do some when i wake up
Got in from work at 8 am from a 10 hour nightshift. Was tired. Till i remembered i had some spare leds left from mfd. i bought a 10 pack but broke about 5 trying to do mfd.
Took a broken led out of the plastic cap (t5) and was left with the little smd and its connectors. Put them into my cigarette light bulb socket and now have a bright blue light instead of the wedge type ones which are dull blue. Wedge ones are now in heater panel. Which is dull so eventually going to wire additional leds like i seen someone on here do before.
With the spare smd's i figured may aswell try them in my dashlights. So i now have two blue bulbs and one white bulb in the middle. I know its odd. But it will do untill i get more bulbs then its literally a case of wip clocks out and change one bulb and i have a full blue interior
minus map lights there white. Never realised how easy it was to remove the clocks. I love corsa's even more now. Such a pleasure to work on
Re: Silver X10XE Slow project
Posted: Mon Sep 02, 2013 6:56 pm
by steviebuggy
Yer they are good to work on!!! That's why I love mine hahahaha
Re: Silver X10XE Slow project
Posted: Mon Sep 02, 2013 8:26 pm
by Teastick
Got some goodies in the post today
Heatgun turned up so i can start the debadge
Linseed oil turned up so black bumpers again
Replacement side indicators arrived ( one broke )
Getting to dark to do anything and im at work tonight so hopefully start the debadge sometime this week while continuing with the wheels
slowly starting to get somewhere
Re: Silver X10XE Slow project
Posted: Tue Sep 03, 2013 12:14 am
by Teastick
Odd speedo lights :p
Silver X10XE Slow project
Posted: Thu Sep 05, 2013 9:30 am
by Teastick
Another small update.
Done an hours worth of prep on the two damaged rims today. I put metal epoxy putty on a few days ago and left it to set for the next day but couldn't be bothered to go round garage that day so left it till today.
Goes on like this
After a lot of sanding
Finished wheel
Also got my door hinge pins, polishing pads, microfibre cloths, dust caps and centre cap key aswell so plenty to keep me busy in the next few days
Thats all for now
Re: Silver X10XE Slow project
Posted: Sat Sep 07, 2013 9:41 am
by Big C
looks like a gd job there mate well done
keep the updates coming!
Re: Silver X10XE Slow project
Posted: Sat Sep 07, 2013 12:17 pm
by Teastick
Big C wrote:looks like a gd job there mate well done
keep the updates coming!
Thanks mate going to b+q today to buy new bulbs for the garage so i can work at night
then i should have wheels done soon
Love your corsa looks properly clean mate good job
Silver X10XE Slow project
Posted: Sun Sep 08, 2013 4:23 pm
by Teastick
Got quite a bit done today
Sprayed the rest of wheels so just need to wait till tomorrow to check there good then get lacquer on them and im done
Figured while ive got black paint out i may aswell paint all wiper arms black as they were faded and almost silver in parts
Tested out linseed oil. Very impressed with it so far
Before
After
Re: Silver X10XE Slow project
Posted: Sun Sep 08, 2013 4:25 pm
by Teastick
Finally remembered to take picture of my subwoofers. So here is the beast
Also had some little cans of plastic paint off my model cars so i took centre console back out and have sprayed it a light gunmetal grey
Here are the wheels
Garage is a tip again
give it another clean when the wheels are done, still got to do centre caps but need to take the vauxhall logo off to spray. Or should i just spray over the emblems?
Also fitted new hinge pins and my doors are silent now
Anyways thats all for now till tomorrow morning when i can clear coat and put things back on
Re: Silver X10XE Slow project
Posted: Sun Sep 08, 2013 4:28 pm
by Teastick
Got everything fitted back on today and test fitted a wheel
Also started work on centre caps. First job was to debadge them. Finally got to use my heatgun lol
Just gotta get the rest of the glue off and im done and ready to prep then paint them
Will get wheels balanced sometime this week
Re: Silver X10XE Slow project
Posted: Sun Sep 08, 2013 4:37 pm
by gazza_no7
Looking good!
going to have to get myself some of that linseed oil!