Page 5 of 7

Re: First Car (1.2 16v Envoy)

Posted: Wed Aug 27, 2014 7:52 pm
by Westley
JamieTee_ wrote:These are the best ones to get mate, mine are 6k hi/lo ones so you can use the high beams too but I just constantly use the HID's unless I'm flashing someone to pass


Sent from my mind.
Which are the best to get? :P


Sent from my iPhone using Tapatalk

Re: First Car (1.2 16v Envoy)

Posted: Wed Aug 27, 2014 8:04 pm
by JamieTee_
Westley wrote:
JamieTee_ wrote:These are the best ones to get mate, mine are 6k hi/lo ones so you can use the high beams too but I just constantly use the HID's unless I'm flashing someone to pass


Sent from my mind.
Which are the best to get? :P


Sent from my iPhone using Tapatalk
ones LED sidelights and ones HID's mate


Sent from my mind.

Re: First Car (1.2 16v Envoy)

Posted: Wed Aug 27, 2014 8:05 pm
by Westley
Oh right sound! So the ones I linked on here are all good?


Sent from my iPhone using Tapatalk

Re: First Car (1.2 16v Envoy)

Posted: Thu Aug 28, 2014 5:19 pm
by Westley
Started on my spoiler today, cleaned all the crap off it and sanded it down so it was all smooth and clean, and this was my ingenious idea for spraying
Image
I have turned the little summer house into my spray booth! :P and I have it attached to the ceiling with a screw in hook and some string to keep it from the ground :P

Image
Primer filler applied and sanded back as there were a fair few scratches and tiny weird for holes as well as chips from the old paint coming off but it's all as smooth as I can get it now :)

I am currently applying the primer so I'll update again soon


Sent from my iPhone using Tapatalk

Re: First Car (1.2 16v Envoy)

Posted: Thu Aug 28, 2014 6:26 pm
by Westley
So... I only got one coat of primer on with a 500ml can I should've expected that really xD I'll pick up more tomorrow


Sent from my iPhone using Tapatalk

Re: First Car (1.2 16v Envoy)

Posted: Thu Aug 28, 2014 7:35 pm
by johnny
Your laying it way to thick 500ml should get 3-4 coats tbh

You have to shoot it really thin for top coat aswell because if it's the tiniest bit to thick it'll run and ruin it

Re: First Car (1.2 16v Envoy)

Posted: Thu Aug 28, 2014 7:35 pm
by Westley
But I did do it really thin xD like literally just enough to slightly cover the colour below D:


Sent from my iPhone using Tapatalk

Re: First Car (1.2 16v Envoy)

Posted: Fri Aug 29, 2014 10:21 pm
by Westley
Could someone suggest/link me to some good cheap white headlights and sidelight bulbs please?

Today was my first experience wet sanding, my lord! The spoiler was so smooth! I found myself stroking it pervertedly xD


Sent from my iPhone using Tapatalk

Re: First Car (1.2 16v Envoy)

Posted: Fri Aug 29, 2014 10:59 pm
by Barraclough
For the side lights just search on eBay for 501 white LEDs. Andy got a load cheap from china. Could always get a hid kit for the headlights? Andy is selling one cheap I think.

Re: First Car (1.2 16v Envoy)

Posted: Fri Aug 29, 2014 11:05 pm
by Westley
Just found these, will they be any good? http://www.ebay.co.uk/itm/370709411735

I would get HID's I know he's selling them cheap but I need to save as much money as possible xD that's how poor I am right now xD


Sent from my iPhone using Tapatalk

Re: First Car (1.2 16v Envoy)

Posted: Fri Aug 29, 2014 11:32 pm
by johnny
Anything with blue tint for headlights will be useless, I fitted a set a while back and I would have seen more by sticking a led torch to the bonnet, without going hid philips and osram nightbreakers are the only good halogen bulbs on the market but they'll set you back about 20 quid and Andy is selling his hids for 15 I think atm

As for sidelights 501 white Smds are what you want, leds only throw a couple lines in the headlight but Smds light the unit up

Re: First Car (1.2 16v Envoy)

Posted: Fri Aug 29, 2014 11:36 pm
by Westley
Ahh I didn't think the blue tint looked all that promising :P well if I can get the money together I'll try get the HID's :) and I'll order some sidelights sometime soon! Thanks for the heads up! :D


Sent from my iPhone using Tapatalk

Re: First Car (1.2 16v Envoy)

Posted: Fri Aug 29, 2014 11:41 pm
by johnny

Re: First Car (1.2 16v Envoy)

Posted: Fri Aug 29, 2014 11:46 pm
by Westley
Cheers! Ordered the sidelights but I'll hold on with the night breakers for a bit longer but cheers lad


Sent from my iPhone using Tapatalk

Re: First Car (1.2 16v Envoy)

Posted: Sat Aug 30, 2014 10:40 pm
by Westley
So the other week when driving back from skeggy, in what seemed torrential rain, I had to stop it was that heavy and I had to drive through a puddle that was at least a foot deep... Since then whenever I accelerate, even in neutral the car makes a strange noise almost like a kind of electric noise? Hard to explain but it sound like what I'd imagine an electric car would sound like :P any ideas?


Sent from my iPhone using Tapatalk