Corsa B 1999 1.2 16V "1-7-11"
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
Yea like I said my cables shoes and drum springs were replaced less than a year ago so il try at the rest axel as the hand brake grips well it's only when released it flags up the handbrake light.
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
- Blackie_No1
- CB-Uk User
- Posts: 628
- Joined: Sat Feb 15, 2014 1:19 pm
Re: Corsa B 1999 1.2 16V "1-7-11"
Make sure there is nothing obstructing the cable over the whole length of it first, lift the carpet at the lever too and make sure nothing is obstructing it there either
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
Well,
can any of the admins or any of you guys figure out a way of exporting all 40 pages of my project guide ? id like to put it all into a PDF file and keep as a record.
ive noticed some of the pics ive uploaded in the past have become broke or missing
can any of the admins or any of you guys figure out a way of exporting all 40 pages of my project guide ? id like to put it all into a PDF file and keep as a record.
ive noticed some of the pics ive uploaded in the past have become broke or missing
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
I'll look into it but it sounds like an admin job
I won't be able to get the pics back though, that's down to who ever hosted the pics
Sent from my C1905 using Tapatalk
I won't be able to get the pics back though, that's down to who ever hosted the pics
Sent from my C1905 using Tapatalk
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
Well,
im working on my car getting it ready for MOT
the two front tyres are bald and ive ran out of time.
Can i fit 2 good alloys R15 to the rear
And 2 good steel R13 to the front ?
Ive also broke my oil sump plug so im going to have to try and get that fixed after MOT. ive used liquid gasket to try and stick it back on for now.
im working on my car getting it ready for MOT
the two front tyres are bald and ive ran out of time.
Can i fit 2 good alloys R15 to the rear
And 2 good steel R13 to the front ?
Ive also broke my oil sump plug so im going to have to try and get that fixed after MOT. ive used liquid gasket to try and stick it back on for now.
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
Re: Corsa B 1999 1.2 16V "1-7-11"
Yes mate u can as long as they are the same size on the same axle its mot passable
If it ain't green and black send it back
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
this is how I understand it aswellandy w wrote:Yes mate u can as long as they are the same size on the same axle its mot passable
as long as the tyres are the same size across the axle it's fine, and same brand across a driving axle
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
It's gona look odd as feck driving into mot lol I'm raging i broke the oil sump plug !
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
Drag car did I email you that file? I was looking through my emails and couldn't see it as sent
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
Thats exactly rightjohnny wrote:this is how I understand it aswellandy w wrote:Yes mate u can as long as they are the same size on the same axle its mot passable
as long as the tyres are the same size across the axle it's fine, and same brand across a driving axle
Sent from my Nokia 3210
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
OK spent 5 and a Half Hours working on the car today getting ready for MOT in the morning.
Used the liquid gasket to stop the oil leak from the broken oil sump plug. hopefully he wont spot it now even tho its BRIGHT BLUE LIQUID GASKET, was tempted to spray paint it black to hide it but thought i just cant be arsed any more, just glad its stopped leaking.
bought a seat belt buckle kit on ebay for £20. in the hope to replace the driver side buckle. what i didnt know is you have to replace the whole thing. as theres a big steal cable wrapped around a bolt that cant be unscrewed so that shattered my plan to replace it. so after trying to find the perfect replacement spring in all the pens in the house. managed to take one of the springs out of the new kit and cut off a few coils to make it fit perfectly.
Put air into the drag car set up wheels seems to handle alot better than the baldy front alloys. no wonder it was pulling to the left lol
had a quick check of the lights and all seem fine. washer jets seem fine (for now) double checked a few things that was pointed out at last years MOT and all seem fine.
Completely cleaned inside and out.
Cars Spotless ready for inspection. still has stone chips and rust marks in the body work but not much i can do about that, shes 14 year old after all.
Used the liquid gasket to stop the oil leak from the broken oil sump plug. hopefully he wont spot it now even tho its BRIGHT BLUE LIQUID GASKET, was tempted to spray paint it black to hide it but thought i just cant be arsed any more, just glad its stopped leaking.
bought a seat belt buckle kit on ebay for £20. in the hope to replace the driver side buckle. what i didnt know is you have to replace the whole thing. as theres a big steal cable wrapped around a bolt that cant be unscrewed so that shattered my plan to replace it. so after trying to find the perfect replacement spring in all the pens in the house. managed to take one of the springs out of the new kit and cut off a few coils to make it fit perfectly.
Put air into the drag car set up wheels seems to handle alot better than the baldy front alloys. no wonder it was pulling to the left lol
had a quick check of the lights and all seem fine. washer jets seem fine (for now) double checked a few things that was pointed out at last years MOT and all seem fine.
Completely cleaned inside and out.
Cars Spotless ready for inspection. still has stone chips and rust marks in the body work but not much i can do about that, shes 14 year old after all.
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
Best of luck
Sent from my Nokia 3210
Sent from my Nokia 3210
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
- scorpiotn1
- CB-Uk User
- Posts: 801
- Joined: Fri Aug 06, 2010 3:54 pm
- Location: Northern Ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
So went to the test this morning, sat nav brought me to the wrong place so showed up 5 mins late .. Great start
The girl wasnt one bit happy but done the test anyway, the attitude she gave me was unreal
First thing she pointed out was the rear licence plate bulb was out.
After that she moved onto the Head Lights, and i can see it flagged on computer the driver side was fail, so i asked if i could adjust it, after more stick she agreed and i managed to pass it.
After that, she took the car stuck it on the lift, and boy did she have fun banging it to death with something i couldn't tell but sounded like a hammer looking for anything she could. i thought she was banging at the Oil Sump and the Temp Liquid gasket patch i made which again remember is bright blue ! you cant miss it. but no she pulled it out and i thought i got away Scot free but she said the passenger steering track rod end was rusted.
Got home, bought a brand new part for £11 and got it fitted in about an hour, all ready for re-test this Wednesday.. in a DIFFERENT test center.
P.S - Also picked up a replacement oil sump for £25 second hand just needs a good clean and fitted.
All i can say is... Big whoop wana fight about it ?
The girl wasnt one bit happy but done the test anyway, the attitude she gave me was unreal
First thing she pointed out was the rear licence plate bulb was out.
After that she moved onto the Head Lights, and i can see it flagged on computer the driver side was fail, so i asked if i could adjust it, after more stick she agreed and i managed to pass it.
After that, she took the car stuck it on the lift, and boy did she have fun banging it to death with something i couldn't tell but sounded like a hammer looking for anything she could. i thought she was banging at the Oil Sump and the Temp Liquid gasket patch i made which again remember is bright blue ! you cant miss it. but no she pulled it out and i thought i got away Scot free but she said the passenger steering track rod end was rusted.
Got home, bought a brand new part for £11 and got it fitted in about an hour, all ready for re-test this Wednesday.. in a DIFFERENT test center.
P.S - Also picked up a replacement oil sump for £25 second hand just needs a good clean and fitted.
All i can say is... Big whoop wana fight about it ?
"I mod for the plesure... Not to drive ignorantly"
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
Garage: - 1999 Corsa B GSI Rep - 2010 Toyota Auris SR
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: Corsa B 1999 1.2 16V "1-7-11"
Not bad so lad i saw them take a huge screwdriver to the underbody of my yoke and beat the sh*t out of it
Sent from my Nokia 3210
Sent from my Nokia 3210