Page 6 of 10
Re: Corsa SRi Project
Posted: Fri Apr 20, 2012 7:15 pm
by c16se corsa
Some good stuff and bad stuff today!
Fuel pump mounted
Base cleaned up and the holes ported out dint get a picture of that tho
Carbs mounted up
Bolted up ready to rock and roll
..........no spark wrong dizzy.........god damn so had to just whip the old loom and ecu on to get a spark to see if it ran
Excuse the s**t video
So all the easy stuffs done now comes the hard bit!
Re: Corsa SRi Project
Posted: Fri Apr 20, 2012 7:19 pm
by c16se corsa
Re: Corsa SRi Project
Posted: Sat Apr 21, 2012 8:44 pm
by nath2905
youre is better than mine already
Re: Corsa SRi Project
Posted: Sun Apr 22, 2012 5:53 pm
by c16se corsa
Dizzy should be here Wednesday eBay bargaining !
Re: Corsa SRi Project
Posted: Tue Apr 24, 2012 7:55 pm
by c16se corsa
Got a few more thing done this week
Inlet all ground out and chamferd out to make it atomise better (courtesy of the french work experince kid)
Had to lower the altenator 4 inch
Throttle linkage and new carb rubbers on
Final mounted not taking the chuffer off again
Running better with it jetted up but still waiting on the dizzy so i can set the ignition timing and so it can advance retard itself under load
Re: Corsa SRi Project
Posted: Tue Apr 24, 2012 8:27 pm
by kevinturna
looking mint
loving the alloys
what carb is that???
Re: Corsa SRi Project
Posted: Tue Apr 24, 2012 8:30 pm
by c16se corsa
cheers mate and there from a zzr600
Re: Corsa SRi Project
Posted: Tue Apr 24, 2012 8:56 pm
by kevinturna
do like a black corsa
cheers mate been looking forever for some carbs :S
Re: Corsa SRi Project
Posted: Tue Apr 24, 2012 9:05 pm
by kevinturna
oh and how much would you charge for making another mani? for the carbs cheers
Re: Corsa SRi Project
Posted: Tue Apr 24, 2012 9:10 pm
by nath2905
looks mint mate
Re: Corsa SRi Project
Posted: Tue Apr 24, 2012 9:14 pm
by c16se corsa
kevinturna wrote:oh and how much would you charge for making another mani? for the carbs cheers
it would probs be about 80 quid ish but i would need the carbs and a inlet manifold gasket aswell
nath2905 wrote:looks mint mate
its slowley getting there just hope this dizzy turns up tomorrow thencan get it on c02 machine and set up
Re: Corsa SRi Project
Posted: Tue Apr 24, 2012 9:16 pm
by kevinturna
ok cheers mate, when i got the moneys ill give u a message
Re: Corsa SRi Project
Posted: Tue Apr 24, 2012 9:18 pm
by c16se corsa
no worries mate
Re: Corsa SRi Project
Posted: Tue Apr 24, 2012 11:06 pm
by matty589
looking good mate
Re: Corsa SRi Project
Posted: Tue Apr 24, 2012 11:13 pm
by c16se corsa
matty589 wrote:looking good mate
cheers bud
coming togeter niceley