Page 1 of 1
alloys HELP PLEASE
Posted: Sat Dec 13, 2008 3:10 pm
by tanzil
want to get alloys put on my 5dr corsa, but dny know what 1s to get
i want 17's but dnt know what ofset or any ov that crap.
will i need to get my car lowered.
link is below of the allows i want.
http://www.alloywheels.com/product.asp? ... rSort=None
HELP PLEASE
Re: alloys HELP PLEASE
Posted: Sat Dec 13, 2008 4:23 pm
by Root
you'll probably need to do something to the rear arches and/or get wider arch kit for 17s
Re: alloys HELP PLEASE
Posted: Sat Dec 13, 2008 4:31 pm
by olliejones8
tanzil wrote:want to get alloys put on my 5dr corsa, but dny know what 1s to get
i want 17's but dnt know what ofset or any ov that crap.
will i need to get my car lowered.
link is below of the allows i want.
http://www.alloywheels.com/product.asp? ... rSort=None
HELP PLEASE
Do they sell those alloys on a 4 stud, because that picture was of a 5 stud alloy.
Your looking for as close to offset ET49 as you can get to save rubbing problems, but with 17" you will have srubbing. Why not go with 15" Vaux wheels, save you alot of time and effort and give a good feel/stance to the car
Re: alloys HELP PLEASE
Posted: Sat Dec 13, 2008 4:51 pm
by tanzil
thank might go for 15's not but dont know what tyers any ideas which 1 i should have
Re: alloys HELP PLEASE
Posted: Sat Dec 13, 2008 4:59 pm
by olliejones8
tanzil wrote:thank might go for 15's not but dont know what tyers any ideas which 1 i should have
Erm, if your looking for 15" Vaux alloys with tyres, keep your eye out on this forum and post a thread in the Wanted sectionm you will pick some up pretty quick and at a good price aswell
Re: alloys HELP PLEASE
Posted: Sat Dec 13, 2008 5:29 pm
by tanzil
yh do you know what ofset i should have on them or what this means
Re: alloys HELP PLEASE
Posted: Sat Dec 13, 2008 5:36 pm
by olliejones8
tanzil wrote:yh do you know what ofset i should have on them or what this means
The ideal Vauxhall offset is ET49, The problem you will get is you buy alloys with a lower offset, they will stick out, meaning they will hit the arches and rub
Re: alloys HELP PLEASE
Posted: Sat Dec 13, 2008 6:22 pm
by tanzil
what do you suggest then
Re: alloys HELP PLEASE
Posted: Sat Dec 13, 2008 8:37 pm
by olliejones8
tanzil wrote:what do you suggest then
I suggest getting a set of Vauxhall Alloys, double check that the offset is ET49 but they will fit lush and look quality
Re: alloys HELP PLEASE
Posted: Sat Dec 13, 2008 9:41 pm
by tanzil
Re: alloys HELP PLEASE
Posted: Sat Dec 13, 2008 10:55 pm
by olliejones8
They have offset ET35, which means if you lower it you will have serious rubbing issues
Re: alloys HELP PLEASE
Posted: Sun Dec 14, 2008 12:51 am
by tanzil
willthese be ok if u dont lower my car
Re: alloys HELP PLEASE
Posted: Sun Dec 14, 2008 12:54 am
by olliejones8
tanzil wrote:willthese be ok if u dont lower my car
Erm i will say yeah, but they will stick out which will affect your ride, think if you have summit heavy in your car, or even serious speed bumps. Just keep that in mind matey
Re: alloys HELP PLEASE
Posted: Mon Dec 15, 2008 10:20 am
by Chrex
check they've defo got them 1st...that is an obsolete wheel, wolfrace dont make them anymore!
Re: alloys HELP PLEASE
Posted: Tue Dec 16, 2008 11:14 am
by winslade
don't get those .. i swear you will regret it .. honestly !!!! get some vauxhall 15" .. some astra or cav jobbies .. cheaper and also GM manufactured for a recomended better fit !!!! saves money mate and if they are in poo condition .. get am re-furbed .. still be cheaper !!!