Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

i have a 1.2L single point injection corsa and was thinking of dropping a c14se single point injection engine in, what would i need to do for this to work ?

would it be a straight bolt in job or would i have to change the ECU , GEARBOX and LOOM?

HELP !!!

cheers

deffo have to change the ecu and loom

i dont think you would have to change much else other than engine mounts

but i am not 100% sure

ok cheers for that the brakes should be ok as its got the 2.0 astra brakes on it

u have 2.0 litre brakes on a 1.2

lmao y nt respect atleast u cn stop

yep 2.0 disks and calipers they were put on by last owner they need bleeding tho the brakes only work on the last little bit of the pedal at the bottom

get em bled lol thats like havin a ferrari with 2quids worth of fuel lmao

be well good once fully working

will i have to change all the look if i put a 1.4 in my corsa or will the ECU be a staight unplug n put 1.4 1 in?

will i have to change all the loom if i put a 1.4 in my corsa or will the ECU be a staight unplug n put 1.4 1 in?

IMO its really not worth changing engines. There really is'nt gonna be that much difference in power/torque. It seems alot of work to prob gain about 10-20bhp. You would prob gain more by doing some polishing/porting to the head, free flowing (deburing) the manifolds, FULL performance exhaust and a aftermarket air filter. Fair play tho, saft first with the brakes. Thats normally everyone lasy job!!

YOU DO NOT HAVE TO CHANGE WIRING LOOMS OR ECU's!!!!! it is just a straight swap coz i dun this before on 4 other corsa's, only time u would have to change loom and ecu is if u fitting 1.4sri engine (multi point inj), all the 1.2 and 1.4i run the same loom and ecu. i only dun them coz it was a cheap swap, nippy little motor and look exactly the same as 1.2 so coppers cant tell no difference.

ok cheers for that ... and i dont have the money to do all the performance mods .. as i have a 1.4 engine sitting in my garage , and i will also get it chipped as ive got a mate who can do it for nothing , will i have to change the gearbox ,, and what else will need changing under the bonnet ??

nothing mate, all pil pump, water pump etc etc can all be switched, but it safer to get new timing belt at least.

Hi!

I have a Corsa B C12NZ end i´ve put a C14SE from a Astra... Wirings from the C14SE don´t work on the Corsa wiring...

What should i do?

astrasi123 wrote:i have a 1.2L single point injection corsa and was thinking of dropping a c14se single point injection engine in, what would i need to do for this to work ?

would it be a straight bolt in job or would i have to change the ECU , GEARBOX and LOOM?

HELP !!!

cheers

c14se is the multipoint injection not spi think spi is c14nz so you would need engine loom and prob ecu from a c14se corsa or astra and if your going to go to trouble of taking engine out why not go for a c16se or c20 8valve prob wont be much harder at least you got the brakes for it lmao